User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Media and tray | 44
9 When you print a document, set the paper type and size for the tray (see "Setting the paper
size and type" on page 48).
The tray is preset to Letter or A4 size, depending on your country. To change the size to A4 or
Letter, you must adjust the lever and paper width guide properly.
1 Pull the tray out of the machine. Open the paper cover and remove paper from the tray if
necessary.
2 If you want to change the size to Letter, hold the lever at the back of the tray, and rotate the
lever clockwise. You can see the lever when you move the paper length guide to the
legal-sized paper (LGL).
3 Squeeze the paper width guide and slide it to the edge of the lever.
LTR
A4