User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Media and tray | 51
Loading originals
You can use the scanner glass or the document feeder to load an original for copying, scanning,
and sending a fax.
Illustrations on this user’s guide may differ from your machine depending on its options
or models. Check your machine type (see "Front view" on page 21).
On the scanner glass
Using the scanner glass, you can copy or scan originals. You can get the best scan quality,
especially for colored or gray-scaled images. Make sure that no originals are in the document
feeder. If an original is detected in the document feeder, the machine gives it priority over the
original on the scanner glass.
1 Lift and open the scanner lid.
2 Place the original face down on the scanner glass. Align it with the registration guide at the
top left corner of the glass.