User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Installing driver over the network | 57
Installing driver over the network
• Before installing, check whether your computer’s OS support the software (see
"Operating System" on page 8).
• The machine that does not support the network interface, it will not be able to use this
feature (see "Rear view" on page 23).
• You need to download software packages from the HP website to install the printer
software. For HP's all-inclusive help for the printer, go to
www.hp.com/support/colorlaser170MFP
.
Windows
The firewall software might be blocking network communication. Before connecting the
device to the network, disable the computer’s firewall.
1 Make sure that the machine is connected to the network and powered on. Also, your
machine’s IP address should have been set (see "Setting IP address" on page 55).
2 Download printer driver software from the HP website.
(www.hp.com/support/colorlaser170MFP
).
3 Turn on the machine.
4 Unzip the driver package and run the driver installer.
5 Follow the instructions in the installation window.