User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Wireless network setup | 60
2 Within 2 minutes, press the WPS (PBC) button on the access point (or wireless router).
a. The machine is connecting to the access point (or wireless router).
b.
When the machine is successfully connected to the wireless network, the LED light stays on.
3 Continue to install the software.
Using the Wi-Fi Networks
Before starting, you will need to know the network name (SSID) of your wireless network and the
network key if it is encrypted. This information was set when the access point (or wireless router)
was installed. If you do not know about your wireless environment, please ask the person who set
up your network.
1 Select the (Menu) > Network > Wi-Fi > Wi-Fi Settings button on the control panel.
Or, Press the (Wireless), access to the Wi-Fi menu.
2 Press the OK to select the setup method you want.
• Wizard > Search List (recommended): In this mode, the setup is automatic. The machine
will display a list of available networks from which to choose. After a network is chosen
then printer will prompt for the corresponding security key.
• Custom: In this mode, users can give or edit manually their own SSID, or choose the
security option in detail.
3 Follow the instructions to set up the wireless network.