User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Wireless network setup | 61
Setup using Windows
Setting up via USB cable
Items to prepare
• Access point
• Network-connected computer
• You need to download software packages from the HP website to install the printer software.
For HP's all-inclusive help for the printer, go to www.hp.com/support/colorlaser170MFP
.
• A machine installed with a wireless network interface
• USB cable
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer, access point, and machine.
3 Download printer driver software from the HP website
(www.hp.com/support/colorlaser170MFP
).
4 Unzip the driver package and run the driver installer.
5 Review and accept the installation agreements in the installation window. Then, click Next.
6 Select Wireless on the Printer Connection Type screen. Then, click Next.
7 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my
printer's wireless network. Then, click Next.
If your printer is already connected on the network, select No, my printer is already
connected to my network.
8 Select Using a USB cable on the Select the Wireless Setup Method screen. Then, click Next.
9 After searching, the window shows the wireless network devices. Select the name (SSID) of
the access point you want to use and click Next.
10When the wireless network set up is completed, disconnect the USB cable between the
computer and machine. Click Next.
11 Select the components to be installed.
12 Follow the instructions in the installation window.