User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Wireless network setup | 62
Access point without a USB cable
Items to prepare
• Wi-Fi-enabled PC running Windows 7 or higher and an access point (router)
• You need to download software packages from the HP website to install the printer software.
For HP's all-inclusive help for the printer, go to www.hp.com/support/colorlaser170MFP
.
• A machine installed with a wireless network interface
While setting the wireless network, the machine uses PC's wireless LAN. You might not be
able to connect to the Internet.
1 Turn on your computer, access point, and machine.
2 Download printer driver software from the HP website
(www.hp.com/support/colorlaser170MFP
).
3 Unzip the driver package and run the driver installer.
4 Review and accept the installation agreements in the installation window. Then, click Next.
5 Select Wireless on the Printer Connection Type screen. Then, click Next.
6 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my
printer's wireless network. Then, click Next.
If your printer is already connected on the network, select No, my printer is already
connected to my network.
7 Select Using a direct wireless connection on the Select the Wireless Setup Method screen.
Then, click Next.
8 When the wireless network set up is completed, click Next.
9 Follow the instructions in the installation window.
Using a network cable
See your network administrator, or the person that set up your wireless network, for
information about your network configuration.