User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Using HP Embedded Web Server | 66
Using HP Embedded Web Server
• Internet Explorer 8.0 or higher is the minimum requirement for HP Embedded Web
Server.
• Before using the programs below, set the IP address first.
• HP Embedded Web Server explanation in this user’s guide may differ from your machine
depending on its options or models.
• Network model only (see "Variety feature" on page 10).
There are several programs available to setup the network settings easily in a network
environment. For the network administrator especially, managing several machines on the
network is possible.
HP Embedded Web Server
The web server embedded on your network machine allows you to do the following tasks:
• Check the supplies information and status.
• Customize machine settings.
• Configure the network parameters necessary for the machine to connect to various network
environments.
Accessing HP Embedded Web Server
1 Access a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address of your printer (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
2 Your machine’s embedded website opens.
Logging into HP Embedded Web Server
Before configuring options in HP Embedded Web Server, you need to log-in as an administrator.
You can still use HP Embedded Web Server without logging in but you won’t have access to
Settings tab and Security tab.
1 Click Login on the upper right of the HP Embedded Web Server website.
2 If it’s your first time logging into HP Embedded Web Server you need to log-in as an
administrator. Type in the below default ID (admin). We recommend you to set the default
password for security reasons.