User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
HP Smart app | 70
Connect using the HP Smart app
You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app
is supported on iOS, Android, and Windows devices.
1 Make sure your computer or mobile device is connected to your wireless network and you
know the password of your wireless network.
2 Check if the printer is in the Auto Wireless Connect (AWC) setup mode.
If this is the first time you set up the printer, the printer is ready for setup after the printer is
powered on. It keeps searching for the HP Smart app to connect within 2 hours, and then
stops searching.
To put the control panel to the Auto Wireless Connect (AWC) setup mode, press and hold
the (Wireless) button for at least 20 seconds until the (Status) and the (Power)
LED start blinking together.
3 Open the HP Smart app, and then do one of the following:
• Windows: On the home screen, click or tap Find Printer. If the printer is not found, click or
tap Set up a new printer. Follow the onscreen instructions to add the printer to your
network.
• iOS/Android: On the home screen, tap the Plus icon and then select the printer. If the
printer is not in the list, tap Add a new printer. Follow the onscreen instructions to add the
printer to your network.
Change the default printer setting the HP Smart app
You can set the printer setting from HP Smart app.
1 Open the HP Smart app.
2 Tap the Plus icon if you need to change to a different printer, or add a new printer.
3 Tap Printer Settings.
4 Select the option you want, and then change the setting.