User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Changing the settings for each copy | 88
Changing the settings for each copy
Your machine provides default settings for copying so that you can quickly and easily make a
copy. However, if you want to change the options for each copy, use the copy function buttons on
the control panel.
• If you press (Cancel) while setting the copy options, all of the options you have set
for the current copy job will be canceled and returned to their default status. Or, they
will automatically return to their default status after the machine completes the copy
in progress.
• Accessing menus may differ from model to model (see "Accessing the menu" on page
30).
• It may be necessary to press OK to navigate to lower-level menus for some models.
Darkness
If you have an original containing faint marking and dark images, you can adjust the brightness
to make a copy that is easier to read.
1 Select (copy) > (Menu) > Copy Feature > Darkness on the control panel.
Or select Contrast button on the control panel.
2 Select the option you want and press OK.
For example, the Light+5 being the lightest, and the Dark+5 being the darkest.
3 Press (Cancel) to return to ready mode.
Original type
The original setting is used to improve the copy quality by selecting the document for the current
copy job.
1 Select (copy) > (Menu) > Copy Feature > Original Type on the control panel.
Or select (Menu) > Copy Feature > Original Type on the control panel.
2 Select the option you want and press OK.
• Text: Use for originals containing mostly text.