User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Changing the settings for each copy | 89
• Text/Photo: Use for originals with mixed text and photographs.
If texts in the printout is blurry, select Text to get the clear texts.
• Photo: Use when the originals are photographs.
• Magazine: Use when the originals are magazine.
3 Press (Cancel) to return to ready mode.
Reduced or enlarged copy
You can reduce or enlarge the size of a copied image from 25% to 400% when you copy original
documents from the scanner glass.
• This feature may not be available depending on model or optional goods (see "Variety
feature" on page 10).
• If the machine set to Eco mode, reduce and enlarge features are not available.
To select from the predefined copy sizes
1 Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge on the control panel.
Or select (Menu) > Copy Feature > Reduce/Enlarge on the control panel.
2 Select the option you want and press OK.
3 Press (Cancel) to return to ready mode.
To scale the copy by directly entering the scale rate
1 S
elect (copy) > (
Menu
) >
Copy Feature
>
Reduce/Enlarge
>
Custom
on the control panel.
Or select (Menu) > Copy Feature > Reduce/Enlarge on the control panel.
2 Enter the copy size you want using the numeric keypad.
3 Press OK to save the selection.
4 Press (Cancel) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of your copy.