User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Scanning to WSD | 97
Scanning to WSD
Scans the originals and saves the scanned data on a connected computer if the computer
supports the WSD (Web Service for Device) feature. To use the WSD feature, you need to install
the WSD printer driver on your computer. For Windows 7, you can install the WSD driver by
Control Panel > Devices and Printers > Add a printer. Click Add a network printer from the
wizard.
• The machine that does not support the network interface, it will not be able to use this
feature (see "Features by model" on page 8).
• The WSD feature works only with Windows Vista® or later version that are the
WSD-compliant computer.
• The following installation steps are based on Windows 7 computer.
Installing a WSD Printer Driver
1 Select Start > Control Panel > Devices and Printers > Add a printer.
2 Click Add a network, wireless or Bluetooth printer from the wizard.
3 In the printers list, select the one you want to use, and then click Next.
• The IP address for WSD printer is http://IP address/ws/ (example:
http://111.111.111.111/ws/).
• If no WSD printer is displayed in the list, click The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname and select Web Services Device
from Device type. Then enter the printer's IP address.
4 Follow the instructions in the installation window.
Scanning using the WSD feature
1 Make sure that the machine is connected to your computer and powered on.
2 Place a single document face down on the document glass, or load the documents face up
into the document feeder (see "Loading originals" on page 51).