User's Manual

8 | Aruba 650 Series Hardware Overview Aruba 650 Series Multi-Service Mobility Controller | Installation Guide
z Rubber Feet (for table top deployments)
z Flat Serial Cable (RJ-45)
z Serial Cable Port Adapter (RJ-45 to DB9)
z ArubaOS Software Documentation CD
z Dual-band, High-gain, Omni-directional Detachable Antennae (3x)
z ArubaOS Quick Start Guide
z End User License Agreement (EULA)
Hardware Model Overview
Front View
Figure 1 Aruba 650 Series Front View
1000Base-X (SFP) Ports
There are two 1000Base-X ports for fiber connectivity only and are intended for use with Aruba SFPs (mini-GBICs).
To purchase compatible SFP modules, contact your Aruba sales representative for details and assistance.
10/100/1000Base-T Gigabit Ethernet Ports
There are six 10/100/1000Base-T Gigabit Ethernet (RJ-45) ports on the Aruba 650 Series. Gigabit Ethernet uses all eight wires
and each pair is used in a bi-directional fashion, meaning the same pairs are used for both data transmission and reception.
NOTE
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the
carton, including the original packing materials. Use these materials to repack and return the unit to
the supplier if needed.
NOTE
Aruba tests and supports Aruba optics within their controller system. Third party optics are not
tested or supported; therefore, Aruba does not guarantee proper functionality of third party optics
when used in an Aruba system.
LINK/
ACT
POE
CONSOLE
0 1 2 3
4 5 6 7
LINK/
ACT
1000
LINK/
ACT
LINK/
ACT
10/100/1000Base-T Gigabit
Ethernet Ports with PoE
1000Base-X (SFP) Ports
USB ports
10/100/1000Base-T
Gigabit Ethernet Ports
Media Eject Button
Serial Console Port