User Guide HP LaserJet MFP M232-M237 series
HP company notices THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. ALL RIGHTS RESERVED. REPRODUCTION, ADAPTATION, OR TRANSLATION OF THIS MATERIAL IS PROHIBITED WITHOUT PRIOR WRITTEN PERMISSION OF HP, EXCEPT AS ALLOWED UNDER THE COPYRIGHT LAWS. THE ONLY WARRANTIES FOR HP PRODUCTS AND SERVICES ARE SET FORTH IN THE EXPRESS WARRANTY STATEMENTS ACCOMPANYING SUCH PRODUCTS AND SERVICES. NOTHING HEREIN SHOULD BE CONSTRUED AS CONSTITUTING AN ADDITIONAL WARRANTY.
Table of contents 1 Get started .................................................................................................................................................... 1 Printer views .......................................................................................................................................................... 2 Control panel features ......................................................................................................................................
6 Configure your printer .................................................................................................................................. 38 Use Web Services ................................................................................................................................................. 39 Update the printer ...............................................................................................................................................
Data stored on the toner cartridge ................................................................................................................... 118 End User License Agreement ............................................................................................................................. 119 Customer self-repair warranty service ............................................................................................................. 124 Customer support ...............................
vi ENWW
1 ENWW Get started ● Printer views ● Control panel features ● Use the HP Smart app to print, scan, and manage 1
Printer views ● Printer front view (d/dw model) ● Printer front view (sdn/sdw model) ● Printer back view Printer front view (d/dw model) 2 Feature Description 1 Scanner lid 2 Scanner glass 3 Control panel 4 Output tray/cartridge access door 5 Status light (some models only). For more information, see Light patterns.
Printer front view (sdn/sdw model) ENWW Feature Description 1 Document feeder door 2 Document feeder 3 Tray cover 4 Input tray 5 Scanner lid 6 Scanner glass 7 Output tray/cartridge access door 8 Control panel Printer views 3
Printer back view 4 Feature Description 1 Rear USB port 2 Ethernet port (some models only) 3 Power input 4 Rear access door 5 Security slot Chapter 1 Get started ENWW
Control panel features ● Control panel view (d/dw model) ● Control panel view (sdn/sdw model) ● Control panel display Control panel view (d/dw model) Feature Description 1 Control panel lights Wireless button (some models only) Press (the Wireless button) to turn wireless capability on or off. For more information, see Wireless status of the printer. Press and hold ENWW (the Wireless button) to set up wireless using WPS.
Cartridge light When the Cartridge light is on, it indicates that the cartridge is low on toner. If the Cartridge light blinks, you can continue printing until the Attention light blinks or the status light shows amber. If the Cartridge light blinks and the Attention light is on or the status bar shows amber, a problem with the cartridge has occurred. Reinstall or replace the cartridge to continue printing. See Remove and replace the toner cartridge.
Control panel view (sdn/sdw model) Feature Description 1 Power button 2 Status light When the Status light is on, the printer is ready to print. When the light is blinking, the printer is starting up, receiving print data, or canceling a job. When the light dims, the printer is in Sleep Mode (a low-power state). Paper light The Paper light blinks when the input tray is out of paper, or when there is a paper error.
5 Copy Options Use (the Menu button) and (the Minus button) and (the Plus button) as follows: 1. Press (the Plus/Minus button) to adjust the number of copies to print. 2. Press (the Menu button) to move to the next option, (the Contrast setting icon). 3. Press (the Plus/Minus button) to adjust the contrast. 4. Press (the Menu button) to move to the next option, (the Reduce/Enlarge setting icon). 5. Press (the Plus/Minus button) to adjust the size.
Control panel display Control panel elements The printer has the following control panel elements. Feature 1 Wireless icon (some models only) If the wireless icon is lit, then there is a stable wireless connection. If an exclamation icon appears beside the wireless icon, see Wireless status of the printer. 2 Ethernet icon This indicates the printer is connected through a wired (Ethernet) connection. 3 Wi-Fi Direct icon (wireless model only) The Wi-Fi Direct icon indicates that Wi-Fi Direct is on.
Control panel modes The appearance of the control panel display changes depending on the mode that the printer is in. Three common display modes are shown below. Copy mode The display shows (the Number of Copies icon), and the number of copies currently selected. Contrast mode The display shows (the Lighter/Darker icon), and the current setting. Scale mode (some models only) The display shows (the Reduce/Enlarge icon), and the current scale (as a percentage of the original size).
Use the HP Smart app to print, scan, and manage The HP Smart app can help you perform many different printer tasks, including the following: ● Set up and connect your printer. ● Print and scan documents and photos. ● Share documents through email and other applications. ● Manage printer settings, check printer status, print reports, and order supplies. HP Smart is supported on mobile devices and computers running on iOS, Android, Windows 10, and macOS 10.13 and later.
2 12 Connect your printer ● Connect your printer to a Wi-Fi network using HP Smart ● Connect your printer to a Wi-Fi network using Wi-Fi Protected Setup (WPS) ● Connect your printer to an Ethernet network ● Connect your printer using a USB cable ● Change wireless settings ● Change the connection type Chapter 2 Connect your printer ENWW
Connect your printer to a Wi-Fi network using HP Smart NOTE: This section is applicable to wireless printers only. Install the HP Smart app on your computer or mobile device and use the app to set up or connect the printer to your Wi-Fi network. For information about HP Smart including where to download the app, see Use the HP Smart app to print, scan, and manage. 1. Make sure your computer or mobile device is connected to your Wi-Fi network.
Connect your printer to a Wi-Fi network using Wi-Fi Protected Setup (WPS) This wireless setup method can be used if your router has a WPS button. If the router does not have this button, it is recommended that you connect the printer using the HP Smart app. See Connect your printer to a Wi-Fi network using HP Smart. 1. Make sure your router and printer are not too far from each other. 2. From the printer control panel, press and hold (the Wireless button) for at least 3 seconds to start WPS.
Connect your printer to an Ethernet network If your Ethernet network does not have an Internet connection, connect the printer wirelessly to the HP Smart app. See Connect your printer to a Wi-Fi network using HP Smart. 1. Make sure your computer is connected to the router. 2. Connect your printer and router using an Ethernet cable. (Ethernet cable sold separately.) NOTE: ● The Wi-Fi connection is automatically disabled when you connect the Ethernet cable.
Connect your printer using a USB cable 1. Connect the printer and computer using a USB cable. 2. Open the HP Smart app on your computer. See Use the HP Smart app to print, scan, and manage. 3. From HP Smart, click or tap (the Plus icon) or Add Printer, and then choose the option to select or add a printer. Follow the instructions to add the printer. 4. 16 When prompted, create an HP account and register the printer.
Change wireless settings You can set up and manage the wireless connection for your printer. This includes printing information about network settings, turning the wireless function on or off, and restoring wireless settings. Wireless status of the printer Wireless icon Wireless button (sdn/sdw model) Status light (d/dw model) Wi-Fi Status Off Off Solid white light on the bar. The printer is not connected to the network. To turn on wireless, press (the Wireless button).
To turn on or off the wireless capabilities of the printer Press (the Wireless button) to turn on or off the printer wireless capabilities. To restore network settings to default settings 1. Press and hold (the Information button) for 3 seconds, and then release the button. All control panel buttons will light up. 2. Press and hold (the Wireless button) and (the Cancel button).
Change the connection type USB to a wireless connection Windows 10/macOS 1. Unplug the USB cable from the printer. 2. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device, turn on Bluetooth and location services. 3. If your printer Wi-Fi was previously turned off, make sure to turn it on. For more information about wireless status, see To turn on or off the wireless capabilities of the printer. 4.
3 20 Load media ● Load paper ● Load envelopes ● Load labels ● Load an original on the scanner glass ● Load an original in the document feeder (some models only) Chapter 3 Load media ENWW
Load paper The following information describes how to load paper into the input tray. NOTE: To avoid paper jams: ● Never add or remove paper from the input tray during printing. ● Before loading the input tray, remove all of the paper from the input tray and straighten the stack. ● Use paper that is not wrinkled, folded, or damaged. ● Always use 1 size paper. For example, do not place A5 paper over A4 size paper.
22 3. Insert the stack of paper into the input tray with the top forward and the side to be printed on facing up. 4. Slide the paper guides until they touch the edges of the media. 5. Lower the tray cover and extend the output tray.
Load envelopes The following information describes how to load paper into the input tray. For a list of supported sizes and tray capacity, visit www.hp.com/support/ljM232MFP . Click Product information, and then click the product specifications for your printer. To load envelopes ENWW 1. Remove all paper from the input tray. 2. Insert the envelope into the middle of the input tray, with the short, postage end toward the back of the tray. The side to be printed on should face up. 3.
Load labels The following information describes how to load paper into the input tray. For a list of supported sizes and tray capacity, visit www.hp.com/support/ljM232MFP . Click Product information, and then click the product specifications for your printer. To load labels 24 1. Remove all paper from the input tray. 2. Insert the sheet of labels into the middle of the input tray, with the top edge of the sheet toward the back of the tray. The side to be printed on should face up. 3.
Load an original on the scanner glass You can copy or scan originals by loading them on the scanner glass. NOTE: ● The scanner might not work correctly if the scanner glass and lid backing are not clean. ● Remove all originals from the document feeder tray before lifting the lid on the printer. To load an original on the scanner glass 1. ENWW Lift the scanner lid.
2. Load your original print-side down and align it with the marking on the rear left corner of the glass. TIP: For more help on loading an original, refer to the engraved guides along the edge of the scanner glass. 3. 26 Close the lid.
Load an original in the document feeder (some models only) You can copy or scan a document by placing it in the document feeder. CAUTION: Do not load photos in the document feeder, this might cause damage to your photos. Use only paper that is supported by the document feeder. NOTE: Some features, such as the Fit to Page copy feature, do not work when you load your originals in the document feeder. For those features to work, load your originals on the scanner glass.
4 Print ● Print from a Windows computer ● Print from a Mac computer ● Print with mobile devices NOTE: Depending on your printer, the Status light blinks or a solid green light appears on the bar when the printer is initializing, cooling down, performing automatic cleaning routines, or shutting down. To provide productive printing, this printer may automatically enter cool-down mode under certain environmental conditions. This process might take several minutes.
Print from a Windows computer 1. Make sure you have installed the HP Smart app. See Use the HP Smart app to print, scan, and manage. 2. Open the document you wish to print. 3. From the File menu in your software program, select the Print option. 4. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Setup, or Preferences. ENWW 5. Make sure your printer is selected. 6.
Print from a Mac computer 30 1. Make sure you have installed the HP Smart app. See Use the HP Smart app to print, scan, and manage. 2. From the computer, open System Preference, and select Printers and Scanners. 3. Click + (the Add button/icon), select the printer from the printer list, and then click Add. 4. Once connected, open the document you wish to print and use the Print command. 5. Make sure the desired printer is selected. 6. Change any print settings. 7.
Print with mobile devices You can use the HP Smart app to print documents and photos from your mobile device, social media account, or cloud storage. See Use the HP Smart app to print, scan, and manage. You can also print directly from your mobile devices using AirPrint (iOS) or HP Print Service Plugin (Android): ● iOS: Devices running iOS 4.2 or later have AirPrint pre-installed.
5 32 Copy and scan ● Make a copy ● Copy an identification (ID) card ● Scan using HP Smart (iOS/Android, Windows 10, and macOS) ● Scan using the HP Scan software (Windows 7) Chapter 5 Copy and scan ENWW
Make a copy Follow these steps to make a copy from the scanner glass: 1. Load the document on the scanner glass according to the indicators on the printer. 2. Press ● Use ● Select (the Menu button) to choose any of the following copy settings. (the Minus button) and (the Plus button) to adjust the number of copies to print. (the Lighter/Darker) setting, and then use (the Minus button) and (the Plus button) to adjust the darkness setting for the current copy job. 3.
Copy an identification (ID) card Use the ID Copy feature to copy both sides of identification card, or other small-size documents, onto the same side of one sheet of paper. The printer prints both images at the same time. 1. Open the scanner lid and place the ID card on the top half of the scanner glass as shown. 2. Close the scanner lid and press When the copying is done, 34 Chapter 5 Copy and scan (the ID Copy button) to start copying. (the Open Lid light) is lit and "P2" appears on the display.
ENWW 3. Open the scanner lid, flip over the ID card and place on the same section of the scanner glass. 4. Close the scanner lid and press (the Resume button) to start scanning the second side and print.
Scan using HP Smart (iOS/Android, Windows 10, and macOS) You can use the HP Smart app to scan documents or photos from the printer's scanner, and you can also scan using your device camera. HP Smart includes editing tools that allow you to adjust the scanned image before saving or sharing. You can print, save your scans locally or in cloud storage, and share them via email, SMS, Facebook, Instagram, etc.
Scan using the HP Scan software (Windows 7) Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application. ENWW 1. Load the document on the scanner glass according to the indicators on the printer. 2. Open the HP Printer software. From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name. 3.
6 38 Configure your printer ● Use Web Services ● Update the printer ● Configure the printer using the Embedded Web Server (EWS) Chapter 6 Configure your printer ENWW
Use Web Services The printer offers innovative, cloud-based solutions, such as print anywhere, scan-and-save to cloud, and other services (including supplies auto replenishment). For more information, visit the HP Smart website (www.hpsmart.com). NOTE: To use these cloud-based solutions, the printer must be connected to the Internet. Unless otherwise agreed, HP can modify or cancel these cloud-based solution offerings at its discretion. Set up Web Services 1.
Update the printer HP offers periodic printer updates to improve printer performance, fix issues, or protect your printer against potential security threats. If your printer is connected to a Wi-Fi or Ethernet network with Internet access, the printer automatically updates the printer when new updates are available. By default, the printer automatically checks for updates. TIP: You can check to see if an update is available for the printer at any time. Learn more about checking for printer updates.
Configure the printer using the Embedded Web Server (EWS) Use the Embedded Web Server (EWS) to manage printing functions from your computer.
To open EWS using HP Smart (iOS, Android, and Windows 10) 1. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and manage. 2. From HP Smart, select your printer, and then click or tap Advanced Settings. To open EWS using an IP address (Wi-Fi or Ethernet connection) 1. Find out the IP address. Press 2. Open a web browser, type the IP address or hostname in the address bar, and then click or tap Enter.
Configure IP network settings Use the following sections to configure the printer network settings. View or change network settings Use the Embedded Web Server to view or change IP configuration settings. 1. Open EWS. See To access and use the Embedded Web Server (EWS). 2. Click the Networking tab to obtain network information. Change settings as needed. Rename the printer on a network To rename the printer on a network so that it can be uniquely identified, use the Embedded Web Server. 1. Open EWS.
Change energy-conservation settings The printer includes several economy features to conserve energy and supplies. Set the Sleep/Auto Off After Inactivity setting Use the EWS to set the amount of idle time before the printer enters sleep mode. Complete the following procedure to change the Sleep/Auto Off After Inactivity setting: 1. Open EWS. See To access and use the Embedded Web Server (EWS). 2. Click the System tab, and then select Energy Settings. 3.
7 ENWW Supplies, accessories, and parts ● Order supplies, accessories, and parts ● Configure the HP toner-cartridge-protection supply settings ● Enable or disable the Cartridge Policy feature ● Replace the toner cartridge 45
Order supplies, accessories, and parts Order Order supplies and paper www.hp.com/go/suresupply Order genuine HP parts or accessories www.hp.com/buy/parts Order through service or support providers Contact an HP-authorized service or support provider. Order using the HP Embedded Web Server (EWS) To access, in a supported Web browser on the computer, enter the printer IP address in the address/URL field. The EWS provides options for purchasing Original HP supplies.
Supplies and accessories Item Description Cartridge number Part number Supplies For use in North America, Australia, and New Zealand only HP 134A Black Original LaserJet Toner Cartridge Standard-capacity replacement black toner cartridge 134A W1340A HP 134X High Yield Black Original LaserJet Toner Cartridge High-capacity replacement black toner cartridge 134X W1340X For use in the European Economic Area, Switzerland, UK, and Israel only* HP 135A Black Original LaserJet Toner Cartridge Standard-
Configure the HP toner-cartridge-protection supply settings Use HP Cartridge Policy and Cartridge Protection to control which cartridges are installed in the printer and protect the cartridges that are installed from theft. ● Cartridge Policy: This feature protects the printer from counterfeit toner cartridges by allowing only genuine HP cartridges to be used with the printer. Using genuine HP cartridges ensures the best possible print quality.
Enable or disable the Cartridge Policy feature The Cartridge Policy feature can be enabled or disabled using the embedded web server (EWS). NOTE: ENWW Enabling or disabling this feature might require entering an administrator password. 1. Open EWS. See To access and use the Embedded Web Server (EWS). 2. Click the System tab, and then select Supply Settings. 3. From the Cartridge Policy drop-down menu, select off or Authorized HP. 4. Click the Apply button.
Replace the toner cartridge Cartridge information Continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality. To redistribute the toner, remove the toner cartridge from the printer and gently rock the cartridge back and forth about its horizontal axis. For graphical representation, see cartridge replacement instructions. Reinsert the toner cartridge into the printer and close the cover.
4. Remove the cover from the print cartridge. 5. Insert the print cartridge in the product, and then close the cartridge access door. CAUTION: If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.
8 52 Solve problems ● HP support ● Interpret control-panel light patterns ● Interpret printer display codes ● Print printer reports ● Restore original factory defaults and settings ● Cartridge low ● Printer does not pick up paper or misfeeds ● Clear paper jams ● Improve print quality ● Resolving print quality problems ● Improve copy and scan image quality ● Solve wireless network problems ● Solve Ethernet connection problems Chapter 8 Solve problems ENWW
HP support For the latest product updates and support information, visit the product support website at www.hp.com/ support/ljM232MFP . HP online support provides a variety of options for help with your printer: Get software and drivers: Download software, drivers, and firmware you need for the printer. Ask the community: Join the community forums to find solutions, ask questions, and share tips. HP Diagnostic Tools: Use HP online tools to detect your printer and find recommended solutions.
Interpret control-panel light patterns ● USB model ● Wireless model USB model The Status light on the printer blinks The printer is processing a job or is initializing, restarting, cooling, or cleaning. No action is required. NOTICE: If the Status light blinks quickly, turn off the printer and then turn it on again. If problem persists, Contact HP. The Attention light is on Attention light on, Paper light blinks.
Wireless model ● Overview ● Light patterns Overview Status light overview Description White Idle, sleep, or working Amber Needs attention because an error has occurred Blue Wireless network connection status Green Starting up, processing, or updating Purple Wireless setup mode Light patterns Table 8-2 White Light behavior Description Solid white light on the bar. The printer is idle and not connected to a wireless network.
Table 8-3 Amber (continued) Light behavior Description If (the Paper light) blinks, the printer might be out of paper or not loaded properly (see Load paper). Load paper, and press (the Resume button) to continue. Or there could be a paper jam. Clear jam (see Clear paper jams), and press If (the Resume button) to continue. (the Cartridge light) blinks, the cartridge might be very low or there is a cartridge error (such as incompatible, unauthorized, or protected). Replace the toner cartridge.
Table 8-5 Green Light behavior Description Solid green light on the bar. The printer is initializing, waiting for confirmation, performing automatic cleaning routines, downloading and installing a printer update, or cooling down. (To provide productive printing, the printer may automatically enter the cool-down mode under certain environmental conditions.) For a list of printer display codes, see Interpret printer display codes. NOTICE: The printer must be turned on during the updating process.
Interpret printer display codes Table 8-7 Control-panel light patterns Code on display State of the printer Action Go/01 The printer is in manual-feed mode. Load the correct paper type and size for the print job in the input tray, and then press press Go/02 The printer is processing a manual duplex job. (the Resume button) to continue or (the Cancel button) to cancel the current job.
Table 8-7 Control-panel light patterns (continued) Code on display State of the printer Action Er/07 The toner cartridge is missing or incorrectly installed. Install or reinstall the toner cartridge. Er/08 The toner level is too low for printing. The cartridge needs to be replaced, or the cartridge setting needs to be changed to Continue in the EWS (see To open EWS using HP Smart (iOS, Android, and Windows 10)).
Table 8-7 Control-panel light patterns (continued) Code on display State of the printer Action Er/61 An error occurred when attempting a wireless WPS connection. Press the (the Cancel button) to continue and then try connecting the printer to the wireless network again. See Connect your printer to a Wi-Fi network using Wi-Fi Protected Setup (WPS). If problem persists, try connecting using the HP Smart app. See Connect your printer to a Wi-Fi network using HP Smart.
Print printer reports NOTE: This section is applicable to wireless printers only. For USB model, press and hold Printer report How to print Information Report Press Configuration Report Press and hold (the Resume button) for 3 seconds to print a configuration report. Description Printer Information Report provides a summary of the printer information and its current status. (the Information button). (the Information button) for 3 seconds until all the buttons are lit.
Restore original factory defaults and settings If you disable some functions or change some settings and want to change them back, you can restore the printer to the original factory settings or network settings. 1. Open EWS. See To access and use the Embedded Web Server (EWS). 2. On the System tab, click Service. 3. In the Restore Defaults area, click the Restore defaults button. The printer automatically restarts.
Cartridge low Cartridge is low Actual cartridge life remaining may vary. Consider having a replacement available to install when print quality is no longer acceptable. The cartridge does not need to be replaced now. Continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality. To redistribute the toner, remove the toner cartridge from the printer and gently rock the cartridge back and forth about its horizontal axis.
Printer does not pick up paper or misfeeds Introduction The following solutions can help solve problems if the printer is not picking up paper from the input tray or is picking up multiple sheets of paper at one time. Either of these situations can result in paper jams. ● The product does not pick up paper ● Clean the pickup roller ● The product picks up multiple sheets of paper The product does not pick up paper If the product does not pick up paper from the input tray, try these solutions. 1.
5. Release and hold on to the blue latch, and then remove the panel. 6. Dampen a soft, lint-free cloth with alcohol or water, and then wipe each roller. NOTE: Apply a moderate amount of pressure to each roller to ensure that they are completely cleaned. ENWW 7. Wait approximately 10 minutes to allow the pickup roller to dry completely. 8. While holding onto the blue latch, align and insert the panel as shown. Release the blue latch to lock the panel in the place.
9. Flip the printer back to the original, upright position. 10. Reload the stack of paper into the input tray. 11. Plug the power cord back into the printer, and then turn on the printer. The product picks up multiple sheets of paper If the product picks up multiple sheets of paper from the input tray, try these solutions. 66 1. Remove the stack of paper from the input tray and rotate it 180 degrees, and flip it over. Return the stack of paper to the input tray. 2.
Clear paper jams Introduction The following information includes instructions for clearing paper jams from the printer. ● Jam locations ● Frequent or recurring paper jams? ● Clear jams from the input tray ● Clear jams in the printer base ● Clear jams from the print cartridge area ● Clear jams from the output areas ● Clear jams in the document feeder (some models only) ● Clear jams in the rear duplexer Jam locations Jams can occur at the following locations in the product.
Frequent or recurring paper jams? Follow these steps to solve problems with frequent paper jams. If the first step does not resolve the problem continue with the next step until you have resolved the problem. 1. If paper has jammed in the printer, clear the jam and then print a test page to test the printer. 2. Check that the tray is configured for the correct paper size and type. a. Open EWS. See To access and use the Embedded Web Server (EWS). b.
Clear jams from the input tray Error code: Er/04 CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty. When removing jammed media, pull the jammed media straight away from the product. Pulling jammed media out of the product at an angle can damage the product. NOTE: ENWW Depending on where the jam is located, some of the following steps might not be necessary. 1.
70 3. With both hands, grasp the side of the jammed media that is most visible (this includes the middle), and carefully pull it free from the printer. 4. Reinstall the print cartridge, and then close the cartridge access door.
Clear jams in the printer base Error code: Er/04 ENWW 1. Flip the printer on its side, as shown. 2. Release and hold on to the blue latch, and then remove the panel. 3. Remove the jammed media.
72 4. While holding onto the blue latch, align and insert the panel as shown. Release the blue latch to lock the panel in the place. 5. Flip the printer back to the original, upright position.
Clear jams from the print cartridge area Error code: Er/05 ENWW 1. Open the cartridge access door, and then remove the print cartridge. 2. If you can see the jammed paper, carefully grasp the jammed paper, and slowly pull it out of the printer.
3. 74 Reinstall the print cartridge, and then close the cartridge access door.
Clear jams from the output areas Error code: Er/06 CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects is not covered by the warranty. When a jam occurs, (the Paper light) blinks, and either (the Attention light) blinks or a solid amber light appears on the bar (depending on the printer). Remove any visible jammed paper from the output tray area. Use both hands to remove jammed paper to avoid tearing the paper.
2. Remove any jammed paper visible in the input tray area. Use both hands to remove jammed paper to avoid tearing the paper. 3. Lift the jam-access cover in the document feeder. 4. Remove any jammed paper. 5. Close the jam-access cover. Clear jams in the rear duplexer Error code: Er/42 Use the following procedure to check for paper in all possible jam locations in the rear duplexer. 1. 76 Open the rear access door.
ENWW 2. If you can see the jammed paper, carefully grasp the jammed paper, and then slowly pull it out of the printer. 3. Close the rear access door.
Improve print quality ● Introduction ● Print from a different software program ● Check the paper-type setting for the print job ● Check toner-cartridge status ● Clean the cartridge ● Print a cleaning page ● Visually inspect the toner cartridge ● Check paper and the printing environment ● Adjust Print Density Introduction The following information provides troubleshooting steps to resolve print-quality problems, including the following problems: ● Smears ● Fuzzy print ● Dark print ●
Check the paper type setting on the printer Verify that the tray is loaded with the correct type of paper. Check the paper type setting (Windows) 1. From the software program, select the Print option. 2. Select the printer, and then click the Properties or Preferences button. 3. Check the paper settings. Check the paper type setting (OS X) 1. Click the File menu, and then click the Print option. 2. In the Printer menu, select the printer. 3.
Clean the cartridge During the printing process, cartridges might be contaminated by paper dust and cause print quality issues such as background issues, vertical dark bands, or repetitive horizontal banding. Follow these steps to improve the above mentioned print quality issues: 1. Open EWS. See To access and use the Embedded Web Server (EWS). 2. Click the System tab, and then click Service. 3. In the Cartridge Cleaning Mode area, click Start to begin the cleaning process.
Step two: Check the environment The environment can directly affect print quality and is a common cause for print-quality or paper-feeding issues. Try the following solutions: ● Move the printer away from drafty locations, such as open windows or doors, or air-conditioning vents. ● Make sure the printer is not exposed to temperatures or humidity outside of printer specifications. ● Do not place the printer in a confined space, such as a cabinet. ● Place the printer on a sturdy, level surface.
Resolving print quality problems ● Introduction ● Troubleshoot print quality problems Introduction The following information provides troubleshooting steps for solving image defect issues, including the following defects: ● Light print ● Gray background or dark print ● Blank pages ● Black pages ● Dark or light bands ● Dark or light streaks ● Missing toner ● Skewed images ● Colors that do not align ● Curled paper Troubleshoot print quality problems Table 8-8 Image defects table quick
Table 8-8 Image defects table quick reference (continued) Table 8-12 Black page Table 8-13 Banding defects Table 8-14 Streak defects Table 8-15 Fixing/fuser defects Table 8-16 Image placement defects Table 8-17 Output defects Image defects, no matter the cause, can often be resolved using the same steps. Use the following steps as a starting point for solving image defect issues. 1. Reprint the document.
Table 8-9 Light print Description Sample Possible solutions Light print: 1. Reprint the document. The printed content on the entire page is light or faded. 2. Remove the cartridge, and then shake it to redistribute the toner. 3. Make sure that the cartridge is installed correctly. 4.
Table 8-11 Blank page — No print Description Sample Possible solutions Blank page — No print: 1. The page is completely blank and contains no printed content. Make sure that the cartridge is genuine HP cartridges. 2. Make sure that the cartridge is installed correctly. 3. Print with a different cartridge. 4. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type. 5. If the problem persists, go to www.hp.
Table 8-14 Streak defects Description Sample Possible solutions Light vertical streaks: 1. Reprint the document. Light streaks that usually span the length of the page. The defect displays only in areas of fill, not in text or sections with no printed content. 2. Remove the cartridge, and then shake it to redistribute the toner. 3. If the problem persists, go to www.hp.
Table 8-15 Fixing/fuser defects Description Fixing/fuser Possible solutions Hot fuser offset (shadow): 1. Reprint the document. Slight shadows, or offsets, of the image repeated down the page. The repeated image might fade with each recurrence. 2. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type. 3. If the problem persists, go to www.hp.com/support/ljM232MFP Poor fusing: 1. Reprint the document.
Table 8-17 Output defects Description Possible solutions Output curl: 1. Reprint the document. Printed paper has curled edges. The curled edge can be along the short or long side of the paper. Two types of curl are possible: 2. Positive curl: From the printer EWS, select a heavier paper type. The heavier paper type creates a higher temperature for printing. ● ● 88 Sample Positive curl: The paper curls toward the printed side.
Improve copy and scan image quality Introduction If the printer is having image quality problems, first make sure you are using high-quality originals. If the problem still exists, try the following solutions in the order presented to resolve the issue. ● Check the scanner glass for dirt and smudges ● Check the paper settings ● Optimize for text or pictures ● Edge-to-edge copying If the issue is not resolved, see Improve print quality for further solutions.
4. ● Mixed: Use this setting for documents that contain a mixture of text and graphics. ● Text: Use this setting for documents that contain mostly text. ● Picture: Use this setting for documents that contain mostly graphics. Change the necessary settings, and then click Apply. Edge-to-edge copying The printer cannot print fully edge-to-edge. There is a 4 mm (1/6 in) unprintable border around the page.
Solve wireless network problems ● Introduction ● Wireless connectivity checklist ● The printer does not print after the wireless configuration completes ● The printer does not print, and the computer has a third-party firewall installed ● The wireless connection does not work after moving the wireless router or printer ● Cannot connect more devices to the wireless printer (Wi-Fi Direct) ● The wireless printer loses communication when connected to a VPN ● The network does not appear in the wir
● Verify that the printer is located away from electronic devices that might interfere with the wireless signal. Many devices can interfere with the wireless signal including motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices. ● Verify that the print driver is installed on the computer. ● Verify that you have selected the correct printer port. ● Verify that the computer and printer connect to the same wireless network.
5. Make sure that the wireless network is working correctly. 6. Make sure that your computer is working correctly. If necessary, restart the computer. The wireless printer loses communication when connected to a VPN ● Typically, you cannot connect to a VPN and other networks at the same time. The network does not appear in the wireless networks list ● Make sure the wireless router is turned on and has power. ● The network might be hidden.
Method one: Perform a wireless network diagnostic test using the printer control panel ● From the printer control panel, press and hold press (the Information button) (the Information button) for 3 seconds, and then (the Resume button) at the same time. Method two: Perform wireless network diagnostic test using the EWS 1. Open EWS. See To access and use the Embedded Web Server (EWS). 2. Select the Networking tab. 3. On the Wireless Configuration page, verify that the On option is selected. 4.
Solve Ethernet connection problems Check the following: ENWW ● The network is operational and the network hub, switch, or router is turned on. ● The Ethernet cable is properly connected between the printer and the router. The Ethernet cable is plugged into the Ethernet port on the printer and the light near the connector lights up when connected. ● Antivirus programs, including spyware protection programs, are not impacting your network connection to the printer.
A Printer specifications IMPORTANT: The following specification are correct at the time of publication, but they are subject to change. For current information, see www.hp.com/support/ljM232MFP ● Technical specifications ● System requirements ● Printer dimensions ● Power consumption, electrical specifications, and acoustic emissions ● Operating-environment range ● Warning icons ● Laser Warning Technical specifications For more information, visit www.hp.com/support/ljM232MFP .
Printer dimensions Figure A-1 Dimensions for the printer (d/dw model) Printer fully closed Printer fully open 1. Height 241.90 mm (9.52 in) 436.25 mm (17.17 in) 2. Depth 298.62 mm (11.75 in) 419.61 mm (16.52 in) 3. Width 368 mm (14.48 in) 368 mm (14.48 in) Weight (with cartridges) 7.6 kg (16.
Printer fully closed Printer fully open 1. Height 294.40 mm (11.59 in) 452.83 mm (17.82 in) 2. Depth 307.95 mm (12.12 in) 467.64 mm (18.41 in) 3. Width 418 mm (16.45 in) 418 mm (16.45 in) Weight (with cartridges) 9.5 kg (20.94 lb) Power consumption, electrical specifications, and acoustic emissions See www.hp.com/support/ljM232MFP for current information. CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages.
Warning icons Warning icon definitions: The following warning icons may appear on HP products. Apply appropriate caution where applicable.
Laser Warning 100 Appendix A Printer specifications ENWW
B ENWW Service and support ● HP limited warranty statement ● HP's Premium Protection Warranty: LaserJet toner cartridge limited warranty statement ● HP policy on non-Original HP supplies ● HP anticounterfeit Web site ● Data stored on the toner cartridge ● End User License Agreement ● Customer self-repair warranty service ● Customer support 101
HP limited warranty statement HP PRODUCT DURATION OF LIMITED WARRANTY* HP LaserJet MFP M232–M237 series One-year limited warranty NOTE: *Warranty and support options vary by product, country, and local legal requirements. Go to www.support.hp.com to learn about HP award-winning service and support options in your region. For details on the HP limited warranty policy on supplies, go to www.hp.
provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
5. Title — a consumer who purchases a good from HP must receive clear title to the good. 6. Due care and skill — services provided to you by HP must be provided with due care and skill. 7. Express warranties — HP will be legally required to comply with the express warranty that is set out in its terms and conditions. 8. Reasonable time — repair services provided by HP must be provided within a reasonable time.
New Zealand In New Zealand, the hardware and software comes with guarantees that cannot be excluded under the New Zealand consumer law. In New Zealand, Consumer Transaction means a transaction involving a person who is purchasing goods for personal, domestic or household use or consumption and not for the purpose of a business.
UK, Ireland, and Malta The HP Limited Warranty is a commercial guarantee voluntarily provided by HP. The name and address of the HP entity responsible for the performance of the HP Limited Warranty in your country/region is as follows: UK: HP Inc UK Limited, Cain Road, Amen Corner, Bracknell, Berkshire, RG12 1HN Ireland: Hewlett-Packard Ireland Limited, Liffey Park Technology Campus, Barnhall Road, Leixlip, Co.Kildare Malta: Hewlett-Packard Europe B.V.
beschränkte HP Herstellergarantie eingeschränkt bzw. betroffen. Weitere Hinweise finden Sie auf der folgenden Website: Gewährleistungsansprüche für Verbraucher (www.hp.com/go/eu-legal) oder Sie können die Website des Europäischen Verbraucherzentrums (ec.europa.eu/info/live-work-travel-eu/consumers/ resolve-your-consumer-complaint/european-consumer-centres-network-ecc-net_en) besuchen.
Article L211-12 du Code de la Consommation: « L'action résultant du défaut de conformité se prescrit par deux ans à compter de la délivrance du bien ». Garantie des vices cachés Article 1641 du Code Civil : « Le vendeur est tenu de la garantie à raison des défauts cachés de la chose vendue qui la rendent impropre à l'usage auquel on la destine, ou qui diminuent tellement cet usage que l'acheteur ne l'aurait pas acquise, ou n'en aurait donné qu'un moindre prix, s'il les avait connus.
(www.hp.com/go/eu-legal). Para más información, consulte el siguiente enlace: Garantía legal del consumidor o puede visitar el sitio web de los Centros europeos de los consumidores (ec.europa.eu/info/livework-travel-eu/consumers/resolve-your-consumer-complaint/european-consumer-centres-network-eccnet_en). Los clientes tienen derecho a elegir si reclaman un servicio acogiéndose a la Garantía limitada de HP o al vendedor de conformidad con la garantía legal de dos años.
Portugal A Garantia Limitada HP é uma garantia comercial fornecida voluntariamente pela HP. O nome e a morada da entidade HP responsável pela prestação da Garantia Limitada HP no seu país são os seguintes: Portugal: HPCP – Computing and Printing Portugal, Unipessoal, Lda., Edificio D.
jótállás alapján vagy a kétéves, jogszabályban foglalt eladói szavatosság, illetve, ha alkalmazandó, a jogszabályban foglalt kötelező eladói jótállás alapján érvényesítik. Czech Republic Omezená záruka HP je obchodní zárukou dobrovolně poskytovanou společností HP. Názvy a adresy společností skupiny HP, které odpovídají za plnění omezené záruky HP ve vaší zemi, jsou následující: Česká republika: HP Inc Czech Republic s. r. o.
w ramach Ograniczonej gwarancji HP albo z uprawnień wynikających z dwuletniej rękojmi w stosunku do sprzedawcy. Bulgaria Ограничената гаранция на HP представлява търговска гаранция, доброволно предоставяна от HP. Името и адресът на дружеството на HP за вашата страна, отговорно за предоставянето на гаранционната поддръжка в рамките на Ограничената гаранция на HP, са както следва: HP Inc Bulgaria EOOD (Ейч Пи Инк България ЕООД), гр. София 1766, район р-н Младост, бул.
consument worden op geen enkele wijze beperkt of beïnvloed door de Beperkte Garantie van HP. Raadpleeg voor meer informatie de volgende webpagina: Wettelijke garantie van de consument (www.hp.com/go/eulegal) of u kan de website van het Europees Consumenten Centrum bezoeken (ec.europa.eu/info/live-worktravel-eu/consumers/resolve-your-consumer-complaint/european-consumer-centres-network-ecc-net_en).
Latvia HP ierobežotā garantija ir komercgarantija, kuru brīvprātīgi nodrošina HP. HP uzņēmums, kas sniedz HP ierobežotās garantijas servisa nodrošinājumu jūsu valstī: Latvija: HP Finland Oy, PO Box 515, 02201 Espoo, Finland HP ierobežotās garantijas priekšrocības tiek piedāvātas papildus jebkurām likumīgajām tiesībām uz pārdevēja un/vai rażotāju nodrošinātu divu gadu garantiju gadījumā, ja preces neatbilst pirkuma līgumam, tomēr šo tiesību saņemšanu var ietekmēt vairāki faktori.
HP's Premium Protection Warranty: LaserJet toner cartridge limited warranty statement This HP product is warranted to be free from defects in materials and workmanship. This warranty does not apply to products that (a) have been refilled, refurbished, remanufactured or tampered with in any way, (b) experience problems resulting from misuse, improper storage, or operation outside of the published environmental specifications for the printer product or (c) exhibit wear from ordinary use.
HP policy on non-Original HP supplies HP cannot recommend the use of non-Original HP toner cartridges, either new or remanufactured. NOTE: For HP printer products, the use of a non-Original HP toner cartridge or a refilled toner cartridge does not affect either the warranty to the customer or any HP support contract with the customer.
HP anticounterfeit Web site Go to www.hp.com/go/anticounterfeit when you install an HP toner cartridge and the control-panel message indicates the cartridge is non-Original HP supplies. HP will help determine if the cartridge is genuine and take steps to resolve the problem. Your toner cartridge might not be a genuine HP toner cartridge if you notice the following: ENWW ● The supplies status page indicates that a non-Original HP supply is installed.
Data stored on the toner cartridge The HP toner cartridges used with this product contain a memory chip that assists in the operation of the product.
End User License Agreement READ CAREFULLY BEFORE USING THIS SOFTWARE EQUIPMENT: This End-User License Agreement ("EULA") is a legal agreement between (a) you (either an individual or a single entity) and (b) HP Inc. ("HP") that governs your use of any Software Product, installed on or made available by HP for use with your HP product ("HP Product"), that is not otherwise subject to a separate license agreement between you and HP or its suppliers.
restoring the hard disk of the HP Product with/for which the recovery solution was originally purchased. The use of any Microsoft operating system software contained in such recovery solution shall be governed by the Microsoft License Agreement. 2. UPGRADES. To use a Software Product identified as an upgrade, you must first be licensed for the original Software Product identified by HP as eligible for the upgrade.
including your Internet Protocol address or other unique identifier information associated with your HP Product and data provided by you on registration of your HP Product. As well as providing the upgrades and related support or other services, this data will be used for sending marketing communications to you (in each case with your express consent where required by applicable law).
14. APPLICABLE LAW. This EULA is governed by the laws of the country in which the equipment was purchased. 15. ENTIRE AGREEMENT. This EULA (including any addendum or amendment to this EULA which is included with the HP Product) is the entire agreement between you and HP relating to the Software Product and it supersedes all prior or contemporaneous oral or written communications, proposals and representations with respect to the Software Product or any other subject matter covered by this EULA.
If you are a consumer within the meaning of the Australia Consumer Law and you are purchasing the Software or warranty and support services for the Software which are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then despite any other provision of this EULA, HP limits its liability for failure to comply with a consumer guarantee as follows: a.
Customer self-repair warranty service HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow for greater flexibility in performing defective parts replacement. If during the diagnosis period, HP identifies that the repair can be accomplished by the use of a CSR part, HP will ship that part directly to you for replacement. There are two categories of CSR parts: 1) Parts for which customer self repair is mandatory.
Customer support Get telephone support for your country/region Have the product name, serial number, date of purchase, and problem description ready. ENWW Country/region phone numbers are on the flyer that was in the box with your product or at www.hp.com/support Get 24-hour Internet support, and download software utilities and drivers www.hp.com/support Order additional HP service or maintenance agreements www.hp.com/go/carepack Register your product www.register.hp.
C Environmental product stewardship program ● Protecting the environment ● Ozone production ● Power consumption ● Toner consumption ● Paper use ● Plastics ● HP LaserJet print supplies ● Paper ● Material restrictions ● Disposal of waste equipment by users (EU and India) ● Electronic hardware recycling ● Hardware recycling information (Brazil) ● Chemical substances ● Product Power Data per European Union Commission Regulation 1275/2008 ● SEPA Ecolabel User Information (China) ●
Protecting the environment HP is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment.
Paper use This product’s duplex feature (manual or automatic) and N-up printing (multiple pages printed on one page) capability can reduce paper usage and the resulting demands on natural resources. Plastics Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life. HP LaserJet print supplies Original HP Supplies were designed with the environment in mind.
Disposal of waste equipment by users (EU and India) This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service, or go to: www.hp.
Hardware recycling information (Brazil) Este produto eletrônico e seus componentes não devem ser descartados no lixo comum, pois embora estejam em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que em quantidades mínimas, substâncias impactantes ao meio ambiente. Ao final da vida útil deste produto, o usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas em lei.
SEPA Ecolabel User Information (China) 中国环境标识认证产品用户说明 噪声大于 63.0 dB(A)的办公设备不宜放置于办公室内，请在独立的隔离区域使用。 如需长时间使用本产品或打印大量文件，请确保在通风良好的房间内使用。 如您需要确认本产品处于零能耗状态，请按下电源关闭按钮，并将插头从电源插座断开。 您可以使用再生纸，以减少资源耗费。 The regulation of the implementation on China energy label for printer, and copier 依据“复印机、打印机和传真机能源效率标识实施规则”，本打印机具有中国能效标签。根据“复印机、打印 机和传真机能效限定值及能效等级” (“GB21521”) 决定并计算得出该标签上所示的能效等级和 TEC (典型 能耗) 值。 1. 能效等级 能效等级分为三个等级，等级 1 级能效最高。根据产品类型和打印速度标准决定能效限定值。 2. 能效信息 2.
The Table of Hazardous Substances/Elements and their Content (China) Material Safety Data Sheet (MSDS) Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be obtained by accessing the HP Web site at www.hp.
EPEAT Many HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps identify greener electronics equipment. For more information on EPEAT go to www.epeat.net. For information on HP's EPEAT registered products go to www8.hp.com/us/en/hp-information/global-citizenship/index.
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan) 台灣 限用物質含有情況標示聲明書 Taiwan Declaration of the Presence Condition of the Restricted Substances Marking 若要存取產品的最新使用指南或手冊，請前往 www.support.hp.com。選取搜尋您的產品，然後依照 畫面 上的指示繼續執行。 To access the latest user guides or manuals for your product, go to www.support.hp.com. Select Find your product, and then follow the onscreen instructions.
For more information To obtain information about these environmental topics: ● Product environmental profile sheet for this and many related HP products ● HP’s commitment to the environment ● HP’s environmental management system ● HP’s end-of-life product return and recycling program ● Material Safety Data Sheets Visit www.hp.com/go/environment Also, visit www.hp.
D Regulatory information ● Regulatory statements ● Wireless statements 136 Appendix D Regulatory information ENWW
Regulatory statements European Union and United Kingdom Notice Products bearing the CE marking and UKCA marking comply with one or more of the following EU Directives and/or equivalent UK Statutory Instruments as may be applicable: Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, Eco Design Directive 2009/125/EC, RED 2014/53/EU, RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonized Standards.
Regulatory model identification numbers For regulatory identification purposes, your product is assigned a regulatory model number. Regulatory model numbers should not be confused with marketing names or product numbers.
NOTE: Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. Canada - Industry Canada ICES-003 Compliance Statement CAN ICES-3(B)/NMB-3(B) Power cord instructions Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label.
Laser statement for Finland Luokan 1 laserlaite HP LaserJet MFP M232–M237, laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (2014) mukaisesti. VAROITUS ! Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
Norway: Apparatet må tilkoples jordet stikkontakt. Sweden: Apparaten skall anslutas till jordat uttag. Eurasian Conformity (Armenia, Belarus, Kazakhstan, Kirgizstan, Russia) Производитель и дата производства HP Inc. Адрес: 1501 Page Mill Road, Palo Alto, California 94304, U.S. Дата производства зашифрована в 10-значном серийном номере, расположенном на наклейке со служебной информацией изделия. 4-я, 5-я и 6-я цифры обозначают год и неделю производства.
Телефон/факс: +7 495 797 35 00 / +7 499 92132 50 Қазақстан: "ЭйчПи Глобал Трэйдинг Би.Ви." компаниясынын Қазақстандағы филиалы, Қазақстан Республикасы, 050040, Алматы к.
Wireless statements The statements in this section apply to wireless-capable printers only. FCC compliance statement—United States Exposure to radio frequency radiation CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.
Canadian statements For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. The internal wireless radio complies with RSS 210 of Industry Canada. Pour ĺusage d´intérieur.
Taiwan NCC Statement:(Only for 5GHz) Exposure to Radio Frequency Radiation (Canada) WARNING! Exposure to Radio Frequency Radiation. The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. WARNING! Exposition aux émissions de fréquences radio.
This radio communication equipment has the electromagnetic field strength in compliance with the Safety Standard for the Use of Radio Communication Equipment on Human Health announced by the National Telecommunications Commission. Vietnam Telecom NOTE: Telecom wireless marking for ICTQC Type approved products.
Index A accessories ordering 46 part numbers 47 acoustic specifications 98 ANATEL statement 143 anticounterfeit supplies 117 Australia 103 B bin, output jams, clearing 75 bins, output locating 2, 3 buttons, control panel 5 C Canadian notices ICES-003 compliance 139 cartridge policy 48 cartridges non-HP 116 recycling 128 warranty 115 checklist wireless connectivity 91 cleaning glass 89 paper path 80 clearing jams locations 67 control panel buttons 5 features 5 LED light patterns 54, 58 locating 2, 3 copy id
M Material Safety Data Sheet (MSDS) 132 memory chip, toner cartridge description 118 N network port locating 4 networks supported 96 New Zealand 105 non-Original HP supplies 116 notices Brazil 143 Canada 144, 145 CE mark 137 EU 137 European Union 145 FCC 138, 143 Mexico 145 Nordic 140 Russia 145 United States of America 143 Vietnam 146 number of copies, changing 33 O on/off button, locating 2, 3 online support 125 operating systems (OS) supported 96 operating systems supported 96 ordering supplies and acces
