HP LaserJet MFP M139e-M142e series User Guide SUMMARY This guide provides configuration, use, warranty, safety and environmental information.
HP company notices Copyright and License Trademark Credits Safety information THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. ALL RIGHTS RESERVED.
Table of contents 1 Get started ...................................................................................................................................................................................................1 Printer views ...........................................................................................................................................................................................1 Printer front view..............................................................
Print from a Mac computer................................................................................................................................................................ 18 Print documents......................................................................................................................................................................... 18 Manually print on both sides ..........................................................................................................
Experiencing frequent or recurring paper jams?................................................................................................................... 42 Clear jams from the input tray ................................................................................................................................................. 43 Clear jams from inside the product ....................................................................................................................................
Appendix B Service and support............................................................................................................................................................... 68 HP limited warranty statement......................................................................................................................................................... 68 Country Specific Terms ..............................................................................................................
Material restrictions ............................................................................................................................................................................ 88 Battery information ............................................................................................................................................................................ 88 Disposal of waste equipment by users (EU, UK, and India) .............................................................
Notice for use in Russia ...........................................................................................................................................................101 Mexico statement.....................................................................................................................................................................101 Taiwan statement...............................................................................................................................
1 Get started This section describes the printer parts, control panel features, and other printer functionalities. Printer views Identify main parts of the printer. Printer front view Identify the parts on the front of the printer. Table 1-1 Printer front view Feature Description 1 Control panel 2 Flatbed scanner 3 Output bin 4 Input tray Printer back view Identify the parts on the back of the printer.
Table 1-2 Printer back view Feature Description 1 USB interface port NOTE: A label might be covering the USB port. After setup, you can remove the label and print using a USB connection, if desired, but the printer must also still be connected to the Internet. 2 Power connection Control panel features This topic describes the printer control panel display, buttons, and lights. Control panel display Identify the codes and icons on the printer control panel display.
Table 1-3 Control panel display icons (continued) Icon Name Lighter/Darker Description Press the Copy Options button to select it, and then use the Up or Down button to adjust the darkness setting for the current copy job. Enlarge/Reduce Press the Copy Options button to select it, and then use the Up or Down button to adjust the size percentage of the current copy job. Control panel buttons and lights Identify the buttons and lights on the printer control panel.
Table 1-4 Control panel buttons and lights (continued) Icon Name Description Wireless button and light Press this button to turn the wireless feature on or off, or to configure a Wi-Fi Direct connection. Press and hold this button to configure a WPS connection. If the Wireless light is on, there is a stable wireless connection. If it is blinking, there is currently no wireless connection, or there is either a WPS or Wi-Fi Direct configuration process in progress.
Print reports from control panel This topic describes the printer reports and how to print. Table 1-5 Print reports from control panel Printer report How to print Description Configuration page and network summary page (if networking is supported) 1. Printer configuration page provides the current printer information, cartridge status, or recent events. It can also help troubleshooting printer problems. If the printer is in Sleep mode (the Ready light is on but dim), press the Cancel button 2.
2. Open HP Smart after installation. ● iOS/iPadOS/Android: From the mobile device desktop or app menu, tap HP Smart. ● Windows 10: From the computer desktop, click Start, and then select HP Smart from the app list. ● macOS: From the Launchpad, select HP Smart. 3. Connect your printer wirelessly using HP Smart. See Connect your printer to a Wi-Fi network using HP Smart. 4. When prompted, create an HP account and register the printer.
2 Connect your printer This section describes different ways to connect your printer. Requirements for HP+ printers This topic describes the requirements for HP+ printers. Keep the printer connected to the Internet HP+ printers are cloud-connected devices that must remain connected to the Internet in order to function. The Internet connection enables the printer to deliver HP+ specific app features and firmware updates.
5. From HP Smart, click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer. If prompted, allow Bluetooth and location permissions. Follow the instructions to add the printer to your network. 6. When prompted, create or sign in to an HP account and register the printer. NOTE: When the printer is connected successfully, the Wireless light stops blinking and remains on.
1. If necessary, remove the label covering the USB port at the back of the printer. 2. Connect the printer and computer using a USB cable. 3. Open the HP Smart app on your computer. See Use the HP Smart app to print, scan, and manage. 4. From HP Smart, click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer. Follow the instructions to add the printer. 5. When prompted, create or sign in to an HP account and register the printer.
2. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device, turn on Bluetooth and location services. 3. If your printer Wi-Fi was previously turned off, make sure to turn it on. For more information about wireless status, see Turn on or off the wireless capabilities of the printer. 4. If the printer is no longer in wireless setup mode, restore the printer network settings. See Restore network settings to default settings. 5.
3 Load media This section describes how to load different media into the printer and to load an original on the scanner glass. Load paper This topic describes how to load paper into the input tray. NOTE: To avoid paper jams: ● Never add or remove paper from the tray during printing. ● When loading the tray, do not fan the paper. ● Use paper that is not wrinkled, folded, or damaged. 1. Remove all the media from the input tray if any. 2.
3. Slide the paper guides until they touch the edges of the media. 4. Pull out the output tray extension. Load envelopes This topic describes how to load an envelope into the input tray. For a list of supported sizes and tray capacity, visit www.hp.com/support/ljM139eMFP. Click Product Information, and then select the product specifications for your printer. 12 1. Remove all the media from the input tray if any. 2.
3. Slide the paper guides until they touch the edges of the media. 4. Pull out the output tray extension. Load labels This topic describes how to load labels into the input tray.
For a list of supported sizes and tray capacity, visit www.hp.com/support/ljM139eMFP. Click Product Information, and then select the product specifications for your printer. 14 1. Remove all the media from the input tray if any. 2. Insert the sheet of labels into the middle of the input tray, with the top edge of the sheet toward the back of the tray. The side to be printed on should face up. 3. Slide the paper guides until they touch the edges of the media.
4. Pull out the output tray extension. Load an original on the scanner glass You can copy or scan originals by loading them on the scanner glass. NOTE: The scanner might not work correctly if the scanner glass and lid backing are not clean. 1. Lift the scanner lid. 2. Load your original print-side down and align it with the marking on the rear left corner of the glass. TIP: For more help on loading an original, refer to the engraved guides along the edge of the scanner glass. 3. Close the lid.
4 Print This section describes how to print from different devices. NOTE: When the Attention and Ready lights are blinking, the printer is initializing, cleaning, or cooling down. When the printer is cooling down print jobs might pause. Print jobs will continue when the engine is ready. This might take several minutes. To provide productive printing, this printer may automatically enter cool down mode under certain environmental conditions when required.
5. Click the OK button to print the job. Manually print on both sides You can print on both sides of the paper using a manual process. You will need to reload the pages for the second side. 1. From the software program, select the Print option. 2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the print driver. NOTE: The name of the button varies for different software programs. 3. Click the Layout tab. 4.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the print driver. NOTE: The name of the button varies for different software programs. 3. Click the Layout tab. 4. Select the correct number of pages per sheet from the Pages per sheet drop-down list. 5. Select the correct layout from the Pages per Sheet Layout drop-down list. 6. If you want to add page borders, select the Page Borders check box. 7.
2. Select the printer. 3. Click Show Details or Copies & Pages, and then click the Manual Duplex menu. NOTE: The name of the item varies for different software programs. 4. Click the Manual Duplex box, and select a binding option. 5. Click the Print button. 6. Go to the printer, and then remove any blank paper that is in the input tray. 7. Retrieve the printed stack from the output bin, and place it with the printed-side facing down, top edge first in the input tray. 8.
Print with mobile devices HP mobile printing solutions enable easy printing to the printer from mobile devices. You can use the HP Smart app to print documents and photos from your mobile device, social media account, or cloud storage. See Use the HP Smart app to print, scan, and manage. You can also print directly from your mobile devices using AirPrint (iOS and iPadOS) or HP Print Service Plugin (Android): ● iOS: Devices running iOS 4.2 or later have AirPrint pre-installed.
3. If prompted, enter the Wi-Fi Direct password. NOTE: For Android devices that support Wi-Fi Direct, if the connection method is set to Automatic, the connection will occur automatically, without a password prompt. If the connection method is set to Manual, you will need to either press the Wireless button on the printer to connect to an Android device, or provide a personal identification number (PIN) — available on a printed report— to connect to Windows 10 devices.
5 Copy and scan This section describes how to use the copy and scan features. Make a copy Follow these steps to make a copy from the scanner glass. 1. Load the document on the scanner glass according to the indicators on the printer. See Load an original on the scanner glass. 2. Press the Copy Options button ● Select Number of Copies ● Select Lighter/Darker to choose any of the following copy settings. , and then use the Up or Down button to adjust the number of copies.
● iOS/iPadOS/Android: www.hp.com/go/hpsmart-help ● Windows 10: www.hp.com/go/hpsmartwin-help ● macOS: www.hp.com/go/hpsmartmac-help Scan by using the HP Easy Scan Software (macOS) Use the HP Easy Scan software to initiate scanning from software on your computer. 1. Load the document on the scanner glass according to the indicators on the printer. 2. From the computer, open HP Easy Scan, which is located in the Applications folder. 3. Follow the on-screen instructions to scan the document. 4.
6 Configure your printer This section describes how to configure your printer. Configure the printer using the Embedded Web Server (EWS) Use the HP Embedded Web Server to manage printing functions from your computer instead of the printer control panel.
a. If the printer is in Sleep mode (the Ready light is on but dim), press the Cancel button to wake up the printer. b. Press and hold the Start Copy/Resume button on the control panel for 5 seconds, and then release the button. 2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the configuration page. Press the Enter key on the computer keyboard. The Embedded Web Server opens.
Table 6-1 HP Embedded Web Server features (continued) Tab or section Description ● Supply Settings: Change the settings for Cartridge is low alert and other supplies information. ● Service: Start the Fuser or Cartridge Cleaning mode, turn Less Paper Curl or Archive Print on or off for printing, or change USB connection speed. ● Administration: Set or change the printer password. Enable or disable printer features. NOTE: The System tab can be password-protected.
Manually configure IPv4 TCP/IP parameters Use the Embedded Web Server to manually set an IPv4 address, subnet mask, and default gateway. 1. Open the HP Embedded Web Server. See Access the Embedded Web Server (EWS). 2. Click the Networking tab. 3. In the IPv4 Configuration area, select Manual IP, and then edit the IPv4 configuration settings. 4. Click the Apply button.
Complete the following procedure to change the Shut Down After Delay setting: 1. Open the HP Embedded Web Server. See Access the Embedded Web Server (EWS). 2. Click the System tab, and then select Energy Settings. 3. From the Shut Down After Inactivity drop-down, select the time for the delay. NOTE: The default value is 4 hours. 4. Click the Apply button.
HP Utility consists of pages that you open by clicking in the All Settings list. The following table describes the tasks that you can perform with HP Utility. Table 6-2 Settings available from HP Utility Item Description Supplies Status Show the printer supplies status and gain access to links for ordering supplies online.
NOTE: You must have a print driver installed in order to use this method. 1. Go to www.hp.com/go/support, select your country/region or language, and then click the Software and Drivers link. 2. Type the printer name in the search field, press the ENTER button, and then select the printer from the list of search results. 3. Select the operating system. 4. Under the Firmware section, locate the Firmware Update Utility. 5. Click Download, click Run, and then click Run again. 6.
7 Supplies, accessories, and parts Order supplies or accessories, replace the toner cartridges, or remove and replace another part. The printer only works with Original HP cartridges. NOTICE: If cartridges that are not Original HP cartridges are installed in this printer (including refilled or nonOriginal HP cartridges), the printer will not work as expected. Order supplies, accessories, and parts This topic describes how to order supplies, accessories, and parts.
Cartridge information Continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality. To redistribute the toner, remove the toner cartridge from the printer and gently rock the cartridge back and forth about its horizontal axis. For graphical representation, see cartridge replacement instructions. Reinsert the toner cartridge into the printer and close the cover.
3. Remove the orange cover from the print cartridge. CAUTION: To prevent damage to the print cartridge, hold the print cartridge at each end. Do not touch the roller surface. 4. Grasp both sides of the print cartridge and gently rock the print cartridge from side to side five or six times to distribute the toner evenly inside the cartridge.
5. Bend the tab on the left side of the cartridge until the tab breaks loose, and then pull the tab until all the tape is removed from the cartridge. Place the tab and tape in the print-cartridge box to return for recycling. 6. Insert the print cartridge in the product, and then close the print-cartridge door. CAUTION: If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.
8 Solve problems This section suggests solutions to common problems. You can also get help from the HP Smart app. HP Smart provides alerts for printer issues (jams and other problems), links to help content, and options to contact support for additional assistance. For more information, see Use the HP Smart app to print, scan, and manage. If the suggestions do not solve the problems, try getting help using one of the support services, see HP support.
Table 8-1 Status-light legend Symbol for "light off" Symbol for "light on" Symbol for "light blinking (2 blinks per 3 seconds)" Table 8-2 Light patterns Light pattern Light status Desciption 1 The Attention light is blinking. Depending on display code on the control panel, the printer is in different state. Check Table 8-3 Control panel display codes for Light pattern 1 for code information, printer state, and recommended action.
Table 8-2 Light patterns (continued) Light pattern Light status Desciption NOTE: The Supplies light might or might not be on in this state depending on the supply status. 5 The Wireless light is blinking fast (4 blinks per 3 seconds). There might be an issue with the wireless connection. Check Table 8-7 Control-panel display codes for Light pattern 5 for code information, printer state, and recommended action. 6 The Attention light is off and the Ready light is on. The printer is in Ready mode.
Table 8-2 Light patterns (continued) Light pattern Light status Desciption ● Check your HP account and resolve the issue if any. Table 8-3 Control-panel display codes for Light pattern 1 Code on display State of the printer Action Go/01 The printer is in manual-feed mode. Load the correct paper type and size into the input tray. Press the Start Copy/Resume button Go/02 Go/03 to continue. The printer is processing a manual duplex job.
Table 8-4 Control-panel display codes for Light pattern 2 Code on display State of the printer Action on but no error code will show. To open the Embedded Web Server, see Access the Embedded Web Server (EWS). Table 8-5 Control-panel display codes for Light pattern 3 Code on display State of the printer Action Er/07 The supply is missing or incorrectly installed. Install or reinstall the supply. Er/11 There is an issue with the cartridge.
Table 8-7 Control-panel display codes for Light pattern 5 Code on display State of the printer Action If the problem persists, try connecting using the HP Smart app. See Connect your printer to a Wi-Fi network using HP Smart. Restore the factory-set defaults Restoring the factory-set defaults returns all of the printer and network settings to the factory defaults. It will not reset the page count.
3. Select one of the following options from the Very Low Setting (Black Cartridge): drop-down list: ● Select the Stop option to set the printer to stop printing until you replace the cartridge. ● Select the Continue option to set the printer to alert you that the cartridge is very low, but to continue printing.
Feature Description 1 Internal areas 2 Input tray 3 Output bin NOTE: Jams can occur in more than one location. Experiencing frequent or recurring paper jams? Follow these steps to solve problems with frequent paper jams. If the first step does not resolve the problem continue with the next step until you have resolved the problem. 1. If paper has jammed in the printer, clear the jam and then print a configuration page to test the printer. 2.
If none of these steps resolves the problem, the printer might need service. Contact HP customer support. Clear jams from the input tray Use the following procedure to clear paper jams from the input tray. CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty. When removing jammed media, pull the jammed media straight away from the product.
44 2. Remove the media stack from the input tray. 3. With both hands, grasp the side of the jammed media that is most visible (this includes the middle), and carefully pull it free from the product.
4. Reinstall the print cartridge, and then close the print-cartridge door. Clear jams from inside the product Use the following procedure to check for jams from inside the product. 1. Open the print-cartridge door, and then remove the print cartridge. CAUTION: To prevent damage, do not expose the print cartridge to light. Cover it with a piece of paper.
2. If you can see the jammed paper, carefully grasp the jammed paper, and slowly pull it out of the product. 3. Reinstall the print cartridge, and then close the print-cartridge door. Clear jams from the output areas Use the following procedure to check for paper in all possible jam locations in the output areas.
CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty. 1. Open the print-cartridge door, and then remove the print cartridge. 2. Keep the print cartridge door open, and then with both hands, grasp the side of the jammed media that is most visible (this includes the middle), and carefully pull it free from the product.
3. Reinstall the print cartridge, and then close the print-cartridge door. Improve print quality The following information provides troubleshooting steps to resolve print-quality problems, including the following problems: ● Smears ● Fuzzy print ● Dark print ● Light print ● Streaks ● Missing toner ● Scattered dots of toner ● Loose toner ● Skewed images To resolve these or other print-quality problems, try the following solutions in the order presented.
Print from a different software program Try printing from a different software program. If the page prints correctly, the problem is with the software program from which you were printing. Check the paper-type setting for the print job Check the paper type setting when printing from a software program and the printed pages have smears, fuzzy or dark print, curled paper, scattered dots of toner, loose toner, or small areas of missing toner.
1. If the printer is in Sleep mode (the Ready light is on but dim), press the Cancel button to wake up the printer. 2. Press and hold the Start Copy/Resume button on the control panel for 5 seconds, and then release the button. Step two: Check supplies status The configuration page contains information about the cartridges and other replaceable maintenance parts. 1.
3. Examine the surface of the green imaging drum. CAUTION: Do not touch the imaging drum. Fingerprints on the imaging drum can cause print-quality problems. 4. If you see any scratches, fingerprints, or other damage on the imaging drum, replace the toner cartridge. 5. Reinstall the toner cartridge, and print a few pages to see if the problem has resolved. Check paper and the printing environment Using paper that does not meet HP specifications might cause some print quality problems.
2. Click the System tab, and then select System Setup from the left navigation pane. 3. Select the correct density settings. 4. Click Apply to save the changes. Troubleshoot print quality problems The following information provides common troubleshooting steps for solving image defect issues and examples of specific image defects and steps to resolve these defects.
Table 8-9 Light print Description Sample Possible solutions Light print: 1. Reprint the document. The printed content on the entire page is light or faded. 2. Remove the cartridge, and then shake it to redistribute the toner. 3. Make sure that the cartridge is installed correctly. 4. Print a configuration page and check for life and usage of the cartridge: a. If the printer is in Sleep mode (the Ready light is on but dim), press the Cancel button to wake up the printer. b.
Table 8-11 Blank page — No print Description Sample Possible solutions Blank page — No print: 1. The page is completely blank and contains no printed content. Make sure that the cartridge is genuine HP cartridges. 2. Make sure that the cartridge is installed correctly. 3. Print with a different cartridge. 4. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type. 5. If the problem persists, go to www.hp.com/support.
Table 8-14 Streak defects Description Sample Possible solutions Light vertical streaks: 1. Reprint the document. Light streaks that usually span the length of the page. The defect displays only in areas of fill, not in text or sections with no printed content. 2. Remove the cartridge, and then shake it to redistribute the toner. 3. If the problem persists, go to www.hp.com/support.
Table 8-16 Image placement defects Description Sample Possible solutions Margins and skew: 1. Reprint the document. The image is not centered, or is skewed on the page. The defect occurs when the paper is not positioned properly as it is pulled from the tray and moves through the paper path. 2. Remove the paper and then reload the tray. Make sure that all the paper edges are even on all sides. 3. Make sure that the top of the paper stack is below the tray full indicator. Do not overfill the tray.
Table 8-18 Output defects (continued) Description Sample Possible solutions Output stacking: 1. Reprint the document. The paper does not stack well in the output tray. The stack might be uneven, skewed, or the pages might be pushed out of the tray and onto the floor. Any of the following conditions can cause this defect: 2. Extend the output bin extension. 3. If the defect is caused by extreme paper curl, complete the troubleshooting steps for Output curl. ● Extreme paper curl 4.
3. Change the necessary settings, and then click Apply. Optimize for text or pictures Check the Optimize setting for text or pictures from the HP Embedded Web Server, and then change the setting as needed. 1. Open the HP Embedded Web Server. See Access the Embedded Web Server (EWS). 2. On the Copy tab, select the Optimize drop-down list. 3. Select the setting you want to use. 4. ● Mixed: Use this setting for documents that contain a mixture of text and graphics.
● If the wireless network is working correctly, try accessing other computers on the wireless network. If the network has Internet access, try connecting to the Internet over a wireless connection. ● Verify that the encryption method (AES or TKIP) is the same for the printer as it is for the wireless access point (on networks using WPA security). ● Verify that the printer is within the range of the wireless network.
a. If the printer is in Sleep mode (the Ready light is on but dim), press the Cancel button to wake up the printer. b. Press and hold the Start Copy/Resume button on the control panel for 5 seconds, and then release the button. 3. Compare the service set identifier (SSID) on the configuration page to the SSID in the printer configuration for the computer. 4. If the numbers are not the same, the devices are not connecting to the same network. Reconfigure the wireless setup for the printer.
c. 3. If the window displays round-trip times, the network is working. Make sure that the router or printer connects to the same network that the computer connects to. a. Print a configuration page. If the printer is in Sleep mode (the Ready light is on but dim), press the Cancel button the printer. Press and hold the Start Copy/Resume button to wake up on the control panel for 5 seconds, and then release the button. b.
● Position the wireless router in a central location in line of sight with the wireless printers on the network. HP support For the latest product updates and support information, visit the product support website at: hp.com/support. HP online support provides a variety of options for help with your printer: Table 8-19 HP support Icon Description View video tutorials: Learn how to set up the printer and perform common tasks.
● Product number (located on a label inside the printer) ● Serial number (located on a label inside the printer) Register printer By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support, and product support alerts. If you did not register your printer while installing the software, you can register now at register.hp.com. Additional warranty options Extended service plans are available for the printer at additional costs. Go to hp.
A Printer specifications This topic describes the printer specifications. Review the requirements listed in Before you begin. IMPORTANT: The following specifications are correct at the time of publication, but they are subject to change. For current information, see www.hp.com/support/ljM139eMFP. Technical specifications To learn main technical features of the printer, review the technical specifications for the printer. For more information, visit www.hp.com/support. Select your country or region.
Table A-1 Dimensions for the printer Dimension Printer fully closed Printer fully open 1. Height 196 mm (7.7 in) 447 mm (17.6 in) 2. Width 360 mm (14.2 in) 360 mm (14.2 in) 3. Depth 263 mm (10.4 in) 390 mm (15.4 in) Weight (with cartridges) 5.3 kg (11.7 lb) 5.3 kg (11.7 lb) Power consumption, electrical specifications, and acoustic emissions In order to operate properly, the printer must be in an environment that meets certain power specifications. See www.hp.
Table A-2 Operating environment range (continued) Environment Recommended Allowed Relative humidity 20% to 70% relative humidity (RH), non condensing 10% to 80% (RH), non-condensing Warning icons Warning icon definitions: The following warning icons may appear on HP products. Apply appropriate caution where applicable.
Laser Warning Laser Warning 67
B Service and support HP limited warranty statement Table B-1 HP limited warranty statement HP PRODUCT DURATION OF LIMITED WARRANTY* HP LaserJet MFP M139e-M142e series Two-year limited warranty NOTE: *Warranty and support options vary by product, country, and local legal requirements. Go to www.hp.com/support to learn about HP award-winning service and support options in your region. For details on the HP limited warranty policy on supplies, go to www.hp.com/go/learnaboutsupplies.
standards. HP will not alter form, fit or function of the product to make it operate in a country/region for which it was never intended to function for legal or regulatory reasons. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES.
2. Disclosed Purpose — goods or services supplied by HP that HP represents are reasonably fit for a purpose expressly disclosed by a consumer must be reasonably fit for that purpose. 3. Description — goods supplied by HP must match the description provided by HP. 4. Sample — goods supplied by HP must match any sample shown to you by HP. 5. Title — a consumer who purchases a good from HP must receive clear title to the good. 6.
Table B-2 Support phone numbers Product Phone Support for all HP Products except those listed separately below 0800 449 553 If dialing internationally: +61 2 8031-8317 DeskJet, Office Jet, PSC, All-in-One, Photosmart & Personal LaserJet Series 1000, P1000, M1000 and Colour LaserJet CP1000 Series and model CM1415 0800 441 147 If dialing internationally: +61 2 8934 4380 UK, Ireland, and Malta The HP Limited Warranty is a commercial guarantee voluntarily provided by HP.
Deutschland: HP Deutschland GmbH, Schickardstr. 32, D-71034 Böblingen Österreich: HP Austria GmbH., Technologiestrasse 5, A-1120 Wien Luxemburg: Hewlett-Packard Luxembourg S.C.A., 75, Parc d'Activités Capellen, Rue Pafebruc, L-8308 Capellen Belgien: HP Belgium BVBA, Hermeslaan 1A, B-1831 Diegem Die Rechte aus der beschränkten HP Herstellergarantie gelten zusätzlich zu den gesetzlichen Ansprüchen wegen Sachmängeln auf eine zweijährige Gewährleistung ab dem Lieferdatum.
- correspondre à la description donnée par le vendeur et posséder les qualités que celui-ci a présentées à l'acheteur sous forme d'échantillon ou de modèle; - présenter les qualités qu'un acheteur peut légitimement attendre eu égard aux déclarations publiques faites par le vendeur, par le producteur ou par son représentant, notamment dans la publicité ou l'étiquetage; 2° Ou présenter les caractéristiques définies d'un commun accord par les parties ou être propre à tout usage spécial recherché par l'acheteur
España: Hewlett-Packard Española S.L. Calle Vicente Aleixandre, 1 Parque Empresarial Madrid - Las Rozas, E-28232 Madrid Los beneficios de la Garantía limitada de HP son adicionales a la garantía legal de 2 años a la que los consumidores tienen derecho a recibir del vendedor en virtud del contrato de compraventa; sin embargo, varios factores pueden afectar su derecho a recibir los beneficios bajo dicha garantía legal.
ecc-net/index_en.htm). Konsumenter har rätt att välja om de vill ställa krav enligt HP:s begränsade garanti eller på säljaren enligt den lagstadgade treåriga garantin. Portugal A Garantia Limitada HP é uma garantia comercial fornecida voluntariamente pela HP. O nome e a morada da entidade HP responsável pela prestação da Garantia Limitada HP no seu país são os seguintes: Portugal: HPCP – Computing and Printing Portugal, Unipessoal, Lda., Edificio D.
solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm). A fogyasztóknak jogában áll, hogy megválasszák, hogy a jótállással kapcsolatos igényüket a HP korlátozott jótállás alapján vagy a kétéves, jogszabályban foglalt eladói szavatosság, illetve, ha alkalmazandó, a jogszabályban foglalt kötelező eladói jótállás alapján érvényesítik. Czech Republic Omezená záruka HP je obchodní zárukou dobrovolně poskytovanou společností HP.
Bulgaria Ограничената гаранция на HP представлява търговска гаранция, доброволно предоставяна от HP. Името и адресът на дружеството на HP за вашата страна, отговорно за предоставянето на гаранционната поддръжка в рамките на Ограничената гаранция на HP, са както следва: HP Inc Bulgaria EOOD (Ейч Пи Инк България ЕООД), гр. София 1766, район р-н Младост, бул.
Finland HP:n rajoitettu takuu on HP:n vapaaehtoisesti antama kaupallinen takuu. HP:n myöntämästä takuusta maassanne vastaavan HP:n edustajan yhteystiedot ovat: Suomi: HP Finland Oy, Piispankalliontie, FIN - 02200 Espoo HP:n takuun edut ovat voimassa mahdollisten kuluttajansuojalakiin perustuvien oikeuksien lisäksi sen varalta, että tuote ei vastaa myyntisopimusta. Saat lisätietoja seuraavasta linkistä: Kuluttajansuoja (www.hp.com/go/eu-legal) tai voit käydä Euroopan kuluttajakeskuksen sivustolla (http://ec.
likumīgā garantija (www.hp.com/go/eu-legal) vai arī Eiropas Patērētāju tiesību aizsardzības centra tīmekļa vietni (http://ec.europa.eu/consumers/solving_consumer_disputes/non-judicial_redress/ecc-net/index_en.htm). Patērētājiem ir tiesības izvēlēties, vai pieprasīt servisa nodrošinājumu saskaņā ar HP ierobežoto garantiju, vai arī pārdevēja sniegto divu gadu garantiju. Lithuania HP ribotoji garantija yra HP savanoriškai teikiama komercinė garantija.
To obtain warranty service, please return the product to place of purchase (with a written description of the problem and print samples) or contact HP customer support. At HP's option, HP will either replace products that prove to be defective or refund your purchase price.
Any third party possessing the toner cartridge might have access to the anonymous information on the memory chip. End User License Agreement READ CAREFULLY BEFORE USING THIS SOFTWARE EQUIPMENT: This End-User License Agreement ("EULA") is a legal agreement between (a) you (either an individual or a single entity) and (b) HP Inc.
f. Recovery Solution. Any software recovery solution provided with/for your HP Product, whether in the form of a hard disk drive-based solution, an external media-based recovery solution (e.g. floppy disk, CD or DVD) or an equivalent solution delivered in any other form, may only be used for restoring the hard disk of the HP Product with/for which the recovery solution was originally purchased.
HP will use cookies and other web technology tools to collect anonymous technical information related to HP Software and your HP Product. This data will be used to provide the upgrades and related support or other services described in Section 2. HP will also collect personal information including your Internet Protocol address or other unique identifier information associated with your HP Product and data provided by you on registration of your HP Product.
14. APPLICABLE LAW. This EULA is governed by the laws of the country in which the equipment was purchased. 15. ENTIRE AGREEMENT. This EULA (including any addendum or amendment to this EULA which is included with the HP Product) is the entire agreement between you and HP relating to the Software Product and it supersedes all prior or contemporaneous oral or written communications, proposals and representations with respect to the Software Product or any other subject matter covered by this EULA.
If you are a consumer within the meaning of the Australia Consumer Law and you are purchasing the Software or warranty and support services for the Software which are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then despite any other provision of this EULA, HP limits its liability for failure to comply with a consumer guarantee as follows: a.
Customer support This topic describes where to get different customer support. Table B-3 Customer support options and references Support option Reference Get telephone support for your country/region Country/region phone numbers are on the flyer that was in the box with your product or at www.hp.com/plus-support Have the product name, serial number, date of purchase, and problem description ready. 86 Get 24-hour Internet support, and download software utilities and drivers www.hp.
C Environmental product stewardship program Protecting the environment HP is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment.
Paper use This product’s duplex feature (manual or automatic) and N-up printing (multiple pages printed on one page) capability can reduce paper usage and the resulting demands on natural resources. Plastics Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life. HP LaserJet print supplies Original HP Supplies were designed with the environment in mind.
Table C-1 Battery information Weight Location User-removable ~3g On motherboard No For recycling information, you can go to www.hp.com/recycle, or contact your local authorities or the Electronics Industries Alliance: www.eiae.org. Disposal of waste equipment by users (EU, UK, and India) This symbol means do not dispose of your product with your other household waste.
www.hp.com.br/reciclar Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/ reach.
有关规格的详细信息，请参阅 GB21521 标准的当前版本。 Restriction on Hazardous Substances statement (India) This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste Rule 2016." It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
Substances Table (Taiwan) 92 Appendix C Environmental product stewardship program
Substances Table (China) For more information To obtain information about these environmental topics: ● Product environmental profile sheet for this and many related HP products ● HP’s commitment to the environment ● HP’s environmental management system Substances Table (China) 93
● HP’s end-of-life product return and recycling program ● Material Safety Data Sheets Visit www.hp.com/go/environment. Also, visit www.hp.com/recycle.
D Regulatory information Regulatory statements Regulatory model identification numbers For regulatory identification purposes, your product is assigned a regulatory model number. Regulatory model numbers should not be confused with marketing names or product numbers.
Products bearing the CE marking and UKCA marking comply with one or more of the following EU Directives and/or equivalent UK Statutory Instruments as may be applicable: Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, Eco Design Directive 2009/125/EC, RED 2014/53/EU, RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonized Standards. The full EU and UK Declaration of Conformity can be found at the following website: www.hp.
Connect the power cord between the product and a grounded AC outlet. CAUTION: To prevent damage to the product, use only the power cord that is provided with the product. Notice to users in Japan about the power cord 製品には、同梱された電源コードをお使い下さい。 同梱された電源コードは、他の製品では使用出来ません。 Laser safety The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976.
Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömällelasersäteilylle laitteen ollessa toiminnassa. Älä katso säteeseen. VARNING ! Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. Betrakta ej strålen. Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista: Aallonpituus 775-795 nm Teho 5 m W Luokan 3B laser.
Eurasian Conformity (Armenia, Belarus, Kazakhstan, Kyrgyzstan, Russia) Wireless statements Eurasian Conformity (Armenia, Belarus, Kazakhstan, Kyrgyzstan, Russia) 99
FCC compliance statement—United States Exposure to radio frequency radiation CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 in) during normal operation.
Exposure to Radio Frequency Radiation (Canada) WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches).
This radio communication equipment has the electromagnetic field strength in compliance with the Safety Standard for the Use of Radio Communication Equipment on Human Health announced by the National Telecommunications Commission.
Index A D accessories ordering 31 part numbers 31 acoustic specifications 65 anticounterfeit supplies 68, 80 defaults, restoring 40 dimensions, printer 64 disposal, end-of-life 87, 88 double-sided printing Mac 18, 19 Windows 16, 17 duplex printing Mac 18, 19 duplex printing (double-sided) Windows 16, 17 duplexing manually (Mac) 18, 19 manually (Windows) 16, 17 B batteries included 87, 88 bin, output jams, clearing 46 bins, output locating 1 browser requirements HP Embedded Web Server 24 buttons, control
material restrictions 87, 88 Material Safety Data Sheet (MSDS) 87, 91 memory included 64 memory chip, toner cartridge description 68, 80 mercury-free product 87, 88 mobile printing solutions 64 multiple pages per sheet printing (Mac) 18, 19 printing (Windows) 16, 17 N network port locating 1 networks supported 64 view and print settings 5 New Zealand 70 non-HP supplies 68 O on/off button, locating 1 online support 68, 86 operating systems (OS) supported 64 operating systems supported 64 ordering supplies an
product 68 toner cartridges 68, 79 waste disposal 87, 89 web browser requirements HP Embedded Web Server 24 Web sites customer support 68 fraud reports 68, 80 Material Safety Data Sheet (MSDS) 87, 91 Websites customer support 86 weight, printer 64 Windows system requirements 64 wireless network troubleshooting 58 wireless network interference 61 Wireless to USB 10 Index 105
