Installation Guide

10 Aruba AP-120 Series Indoor Access Point | Installation Guide
Electrical
 Ethernet:
 2 x 100/1000 Base-T auto-sensing Ethernet RJ-45 Interfaces
 MDI/MDX
 IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)
 Power over Ethernet (IEEE 802.3af compliant), 48V DC/200mA (see Table 1 for pin
configuration)
z Power:
 5 VDC power interface, supports powering through an AC-to-DC mains electric power adapter
 POE support on Ethernet ports:
– 802.3af-compliant POE sourcing devices
– POE+ (56 V @ 350 mA)
Wireless LAN
z Network Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11a, and IEEE 802.11n
z Antenna Type:
 Integrated 802.11a/b/g/n omni-directional high-gain antenna
 Detachable 802.11a/b/g/n omni-directional high-gain antenna
z Antenna Gain (Integrated Antennas):
 2.4 – 2.5 GHz/3.2 dBi (max)
 5.180 – 5.825 GHz/5.2 dBi (max)
z Radio Technology:
 Orthogonal Frequency Division Multiplexing (OFDM)
 Direct Sequence Spread Spectrum (DSSS)
z Radio Modulation Type:
 802.11b - CCK, BPSK, QPSK
 802.11g - CCK, BPSK, QPSK,16-QAM, 64-QAM
 802.11a - BPSK, QPSK,16-QAM, 64-QAM
 802.11n draft 2.0
z Media Access Control: CSMA/CA with ACK
z Supported Frequency Bands 2.4GHz:
 2.400 ~ 2.4835GHz (Global), channels country specific
z Supported Frequency Bands 5GHz:
 5.150 ~ 5.250GHz (low band), country-specific
 5.250 ~ 5.350GHz (mid band), country-specific
 5.470 ~ 5.725GHz (Europe), country-specific
 5.725 ~ 5.825GHz GHz (high band), country-specific
z Data Rates:
 802.11b - 1, 2, 5.5, 11 Mbps per channel
 802.11g - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel
 802.11a - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel
 802.11n - Data rate MCS0 – MCS15 (from 6.5 Mbps to 300 Mbps)