User's Manual
Table Of Contents
- Minimum Software Requirements
- Package Contents
- Device Overview
- Before You Begin
- Verifying Pre-Installation Connectivity
- Identifying Specific Installation Locations
- Installing the AP
- Verifying Post-Installation Connectivity
- Configuring the AP-130
- Product Specifications
- Proper Disposal of Aruba Equipment
- Safety and Regulatory Compliance
2 Aruba AP-130 Series Access Point | Installation Guide
Device Overview
Figure 1 AP-130 Series Access Points (AP-134 Shown)
LEDs
The AP-130 Series access point is equipped with five LEDs that indicate the status of various components of
the device.
PWR: Indicates the whether or not the AP-130 is powered on and its status.
ENET 0: Indicates the status and activity of Ethernet port 0
ENET 1: Indicates the status and activity of Ethernet port 1
11b/g/n: Indicates the status of the 2.4 GHz radio
11a/n: Indicates the status of the 5.0 GHz radio
For more information about the LEDs and their behavior, see Table 3 on page 10.
External Antenna Connectors
The AP-134 is designed for use with external antennas. The AP-135 is equipped with internal antennas. For
more information about antenna types and configurations,
visit www.arubanetworks.com.
AP-134_003
134
Antenna Connectors (AP-134 Only)
LED Status Indicators