Installation Guide

ManualsBrandsHewlett Packard ManualsElectronicsAccess Point

Professional installation Guide

Product/s covered in this guide:Device: APEX0100 and APEX0101 is part of the

Aruba’s APEX0100 family, implementing dual radio cards each 3x3 MIMO

supporting IEEE 802.11 a/b/g/n/ac operation.

IMPORTANT - Visit Aruba Support web page for the latest information and

documentation related to this product.

IMPORTANT – Please read this document before installing and using your

product. This device must be installed and used in strict accordance with the 

manufacturer's instructions. Only approved by the manufacturer power adapters must

be used. For replacement, contact your supplier or distributor.

Installation of this product must comply with local regulations and codes. When this

product is used with external antenna/s, please refer to the installation documentation

provided for the antenna/s. Changes or modifications to the device not approved by the

manufacturer of the product could void the user’s authority to operate the equipment

and will void the warranty of the product. No user serviceable parts; all repairs and

service must be handled by a qualified service center. All products using external 

antennas must be professionally installed, and the transmit power of the system must

be adjusted by the professional installer/s to ensure that the system’s EIRP is in

compliance with the limit specified by the regulatory authority of the country of

deployment. During deployment of the system and its initial setup, professional 

installer must ensure that the allowed EIRP limit is not exceeded (in the Country of

exploitation of this equipment).

To achieve this professional installer must use approved and recommended by the

Manufacturer antennas,

Model Type Gain ( dBi) Frequency Band ( MHz)

ANT-3X3-2005 Omni

5 2400-2500

NA 4900-5900

ANT-3X3-5005 Omni

NA 2400-2500

5 4900-5875

ANT-2X2-D805 Directional

5 2400-2500

5 4900-5875

ANT-3X3-5712 Directional

NA 2400-2500

11.5 4900-6000

ANT-2X2-2314 Directional

14 2400-2500

NA 4900-5875

ANT-2X2-5314 Directional

NA 2400-2500

14 4900-6000

ANT-2X2-2714 Directional 14 2400-2483

ANT-3X3-5010 Omni 10 4900-5875

ANT-2X2-D607 Directional

7 2400-2500

7 4900-5875

ANT-3X3-D608 Directional

8 2400-2500

8 4900-5900

ANT-3X3-D905 Directional

5 2400-2500

5 4900-5900

Summary of content (3 pages)

PAGE 1
Professional installation Guide Product/s covered in this guide: Device: APEX0100 and APEX0101 is part of the Aruba’s APEX0100 family, implementing dual radio cards each 3x3 MIMO supporting IEEE 802.11 a/b/g/n/ac operation. IMPORTANT - Visit Aruba Support web page for the latest information and documentation related to this product. IMPORTANT – Please read this document before installing and using your product. This device must be installed and used in strict accordance with the manufacturer's instructions.
PAGE 2
and enter Antenna gain in the software using to setup and manage the product. In additional attenuation between the device and antenna may have to be measured or calculated.
PAGE 3
For example: Where Product transmit power from 2.4GHz band： Port 0=50mW, port 1=50mW, port 2=50mW, The total transmit power= port 0+ port 1+ port 2 = 50mW+50mW+50 mW = 150mW; Where Product transmit power from 5GHz band： Port 0=50mW, port 1=50mW, port 2=50mW, The total transmit power= port 0+ port 1+ port 2 = 50mW+50mW+50 mW = 150mW; If User’s antenna with 14dBi gain max(for 2.4GHz band and 5GHz band), the numeric gain=Log-1(dB antenna gain/10) = Log-1(14/10)=25.