Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products Abstract This document contains safety precautions, environmental notices, and regulatory compliance notices for Hewlett Packard Enterprise products.
© Copyright 2012, 2016 Hewlett Packard Enterprise Development LP The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Contents 1 Safety precautions...............................................................................................5 General precautions.............................................................................................................................5 Symbols on equipment.........................................................................................................................5 Precautions for maintaining and servicing products...............................................
Class B equipment........................................................................................................................23 Notices for Taiwan..............................................................................................................................24 BSMI notices.................................................................................................................................24 Class A EMI warning message......................................................
1 Safety precautions Retain and follow all product safety and operating instructions. Always refer to the documentation (printed or electronic) supplied with your product. If there is a conflict between this document and the product documentation, the product documentation takes precedence. Observe all warnings on the product and in the operating instructions to reduce the risk of bodily injury, electric shock, fire, and damage to the equipment.
This symbol on an RJ-45 receptacle indicates a Network Interface Connection. WARNING: To reduce risk of electric shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle. This symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before touching.
• Do not use conductive tools that could bridge live parts. • Remove all watches, rings, or loose jewelry when working in hot-plug areas of an energized server, storage, networking, or rack product. • Do not attempt to defeat safety interlocks (where provided). • Some products have covers or doors to access hot-plug components and may allow access to hazardous energy circuits or moving fans. ◦ The doors should remain locked during normal operation.
• Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Power supplies Hot-plug power supplies are not designed to be removed or installed with AC power connected to the power supply.
The total combined leakage current should not exceed 5 percent of the input current for the UPS and associated load. • • • ◦ For rack installations, do not exceed the maximum number of UPS products in any single equipment rack. ◦ For rack installations, install the UPS only at the bottom of a rack. To reduce the risk of personal injury or damage to equipment when installing a Remote Emergency Power Off (REPO) port: ◦ The REPO port must be wired by a licensed electrician.
• A reliable grounded (earthed) connection should be checked before connecting PDUs. • Use a Lockout/Tagout procedure to isolate hardwired PDUs from AC power before servicing or replacing the product. • Pluggable PDUs must be disconnected from the product and unplugged from the AC electrical outlet before servicing or replacing the product. • Permanently connected PDUs must be disconnected from the product and the external power source before servicing or replacing the product.
Electrostatic discharge (ESD) When handling any electronic component or assembly (such as a PCI card or memory DIMM), you must observe the following antistatic precautions to prevent damage. An ESD kit (Hewlett Packard Enterprise P/N A3024-80004) is available (or supplied with memory additions). This kit contains one wrist strap, one conductive sheet, and one antistatic foam pad. • Always disconnect power from the server and wear a grounded wrist strap when working around the server.
Fuse replacement CAUTION: For continued protection against risk of fire, replace fuses only with fuses of the same type and the same rating. Disconnect power before changing fuses.
Precautions for products installed in racks and cabinets Materials handling To reduce the risk of personal injury or damage to the equipment: • Observe local occupational health and safety requirements and guidelines for handling materials. • Obtain assistance to lift and stabilize the product during installation or removal. • Remove all pluggable power supplies and modules to reduce the weight of the product. • Be careful when pressing the rail release latches and sliding the product into the rack.
• Disconnect the modem cable from the wall socket before opening a product enclosure, touching or installing internal components, or touching an uninsulated modem cable or jack. • Do not plug telecommunications or telephone connectors into the NIC receptacles.
2 Environmental notices Hewlett Packard Enterprise is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hpe.com/info/reach.
RoHS material content declarations China RoHS material content declaration Chinese version: http://www8.hp.com/us/en/hpe/hp-information/livingprogress/environmentalprogress/ chinarohs.html English version: http://www8.hp.com/us/en/hpe/hp-information/livingprogress/environmentalprogress/ chinarohs-english.
Taiwan RoHS Hazardous Substances table Turkey RoHS material content declaration Ukraine RoHS material content declaration RoHS material content declarations 17
Perchlorate material — Special handling may apply Perchlorate material - special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/ perchlorate/. This product’s real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California.
European Union Commission Regulation 1275/2008 The power data for affected products—including the power consumption of the product in networked standby if all wired network ports are connected and all wireless network ports are activated—is provided in section P14, “Additional information,” of the product IT ECO Declaration available at https://www.hpe.com/global/livingprogress/environmentalprogress/productdata/ iteconetworking_hpe.html.
3 Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number.
Class B equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Notices for China Class A equipment Trusted Platform Module (TPM) – China Import Restrictions HEWLETT PACKARD ENTERPRISE SPECIAL REMINDER: Before enabling TPM functionality on this system, you must ensure that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable.
Notices for Japan VCCI notice Power cord statement Notices for Korea Class A equipment Class B equipment Notices for Japan 23
Notices for Taiwan BSMI notices Class A EMI warning message Battery replacement notice UPS (less than 16A output current) UPS (greater than 16A output current) 24 Regulatory compliance notices
Belarus Kazakhstan Russia marking Manufacturer and Local Representative Information Manufacturer information: • Hewlett Packard Enterprise Company, 3000 Hanover Street, Palo Alto, CA 94304 U.S. Local representative information Russian: • Russia: • Belarus: • Kazakhstan: Local representative information Kazakh: • Russia: • Belarus: • Kazakhstan: Manufacturing date: The manufacturing date is defined by the serial number.
Valid date formats include: 26 • YWW, where Y indicates the year counting from within each new decade, with 2000 as the starting point; for example, 238: 2 for 2002 and 38 for the week of September 9. In addition, 2010 is indicated by 0, 2011 by 1, 2012 by 2, 2013 by 3, and so forth. • YYWW, where YY indicates the year, using a base year of 2000; for example, 0238: 02 for 2002 and 38 for the week of September 9.
Wireless devices In some environments, the use of wireless devices might be restricted. Such restrictions might apply on airplanes, in hospitals, near explosives, or in other hazardous locations. Before you turn on this product, be sure that you understand local policies and have proper authorization. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the FCC radio exposure limits.
Taiwanese notice 28 Regulatory compliance notices
Laser compliance notices This device may contain a laser that is classified as a Class 1 Laser Product in accordance with U.S. FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation. Each laser product complies with 21 CFR 1040.10 and 1040.11 (except for deviations pursuant to Laser Notice No. 50, dated May 27, 2001) and with IEC 60825-1.
Index earth leakage current, 10 ESD, 11 safety precautions, 10 B batteries replacement notices, 15 safety precautions, 9, 11 Belarus Kazakhstan Russia EAC marking, 25 BSMI notices, 24 C cabinet safety, 13 CE compliance marking European Union Regulatory Notice, 22 China import restrictions Trusted Platform Module (TPM), 22 China RoHS Hazardous Substances table, 16 China RoHS material content declaration, 16 D Declaration of Conformity European Union Regulatory Notice, 22 E EAC marking Belarus Kazakhstan
Remote Emergency Power Off (REPO) port safety precautions, 9 RoHS Hazardous Substances table China, 16 Taiwan, 17 RoHS material content declarations China, 16 S safety precautions, 5 batteries, 9, 11 cabinets, 13 fuse replacement, 12 general, 5 grounding, 10 maintaining and servicing products, 6 modems, 13 modems, telecommunications, or LAN options, 13 PDUs, 9 power cords, 7 power products, 7 power supplies, 8 products installed in racks and cabinets, 13 REPO port, 9 telecommunications equipment, 13 UPS, 8
