User Manual

Interpret control-panel light patterns
If the printer requires attention, an error code appears on the control-panel display.
Table 6-1 Status-light legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 6-2 Control-panel light patterns
Light status State of the printer Action
The Attention light is
blinking.
The printer is in manual-feed mode. Load the correct paper type and size into the input tray. Press
the Resume
button to continue.
The printer is processing a manual duplex
job.
Load the pages into the input tray to print the second sides. Press
the Resume
button to continue.
Input tray is empty or loaded with an
unexpected paper size.
Load plain paper or press the Resume
button to continue
with the paper currently loaded.
The input tray is empty. Load the tray.
A door is open. Verify that the top cover is fully closed.
The printer failed to pick a sheet of paper
to print.
Press Resume
to continue.
Paper is jammed in the input tray. Clear the jam.
Paper is jammed in the toner cartridge
area.
Clear the jam.
Paper is jammed in the output bin area. Clear the jam.
The loaded paper is not the size needed for
the print job.
Replace the paper, or press Resume
to continue with the
size currently loaded.
The printer has experienced a general
engine error.
Press Resume
to continue.
If the error repeats, turn off the printer. Wait 30 seconds, and
then turn on the printer.
Incorrect firmware has been loaded.
Press Resume
to continue. Load the correct firmware.
ENWW Interpret control-panel light patterns 73