Operation Manual

Step 4. Attach the Power Cord
1 Connect the power cord between the
printer and a grounded power strip or
wall outlet.
2 All the lights turn on and then briefly
blink in sequence (see Figure 2).
3 The Error (top) Light stays on (see
Figure 3). This indicates the Paper
Input Bin is empty.
Turning the Printer On and Off
Instead of a power switch, the printer has
a SleepMode function.
After 15 minutes of inactivity in ready
state (no errors), the printer turns itself
off by shifting to SleepMode.
The printer is instantly turned on by:
•• sending a print job through your software,
•• pressing the Front Panel Button,
•• opening the Printer Door.
While in SleepMode, the printer retains all
downloaded fonts, macros, and printer
settings. The front panel lights remain off.
1-6 Setting Up the Printer EN