Product External Specifications For 802.11ac PCI Express Card Model Number : MRLBB-1403 Revision: 1.
Contents 1.0 SCOPE........................................................................................................................................................................... 3 1.1 DOCUMENT................................................................................................................................................................. 3 1.2 PRODUCT FEATURES ...........................................................................................................................
1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11ac PCI Express. This PCI Express card is based on QCA (Qualcomm Atheros) chip that complied with IEEE 802.11ac from 5GHz, and it is also backward compatible to comply with IEEE 802.11a and IEEE 802.11n standard. 1.2 Product Features a) Dual band 802.11a / n/ ac radio i) 3 streams 3x3 MIMO ii) 5G operation iii) 1.
2.0 Requirements The following sections identify the detailed requirements of the 802.11ac PCI Express. 2.1 Radio Card Specifications Specification Description Frequency Range 4900–5845 MHz Actual operating frequencies depend on regulatory approval for the country of use. Wireless Medium Orthogonal Frequency Division Multiplexing (OFDM), Spatial multiplexing (MIMO) Network Standards 802.11a, 802.11n, 802.
2.3 Software Requirements The Configuration Software supports Linux driver. This configuration software includes the following functions: Information Information allows you to monitor network status. Configuration Configuration allows you to configure parameters for wireless networking. Security Supports enhanced security WEP, 802.1x, WPA and WPA2. 2.3.1 Security # Feature Detailed Description 2.3.1.1 Encryption 2.3.1.2 WEP Management 2.3.1.3 2.3.1.4 802.
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Notice for Brazil, Aviso aos usuá rios no Brasil Este equipamento opera em cará ter secundá rio, isto é , nã o tem direito a proteçã o contra interferê ncia prejudicial, mesmo de estaçõ es do mesmo tipo, e nã o pode causar interferê ncia a sistemas operando em cará ter primá rio.
