p650 Digital Camera Appareil photo numérique Cámara digital Câmera digital Quick Start Guide Guide de démarrage rapide Guía rápida Guia rápido de instruções For the full version of the p650 product user manual go to: www.hp.com/support Pour la version complète du manuel d’utilisateur du modèle p650, allez sur: www.hp.com/support Para descargarse la versión completa del manual de instrucciones del modelo p650, puede acceder al siguiente enlace: www.hp.
Quick Start Guide ENGLISH General Guide • Camera Front Back 1 2 3 4 5 6 7 10 11 12 13 [ ] 9 1 2 3 4 5 6 7 8 9 8 [ ] [ ] [ ] [SET] 18 17 16 15 14 10 [ ] (REC) button 11 LED 12 [ ] (Movie) button 13 Strap 14 [SET] button 15 [ ] (Delete) button 16 [ ] (PLAY) button 17 ([ ] [ ] [ ] [ ]) Zoom controller Shutter button Front lamp [ON/OFF] (Power) Flash Cover Flash Strap Lens Microphone Bottom 19 Battery/m
Configuring Basic Settings the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. 1. 2. Press [ON/OFF] (Power) to on the camera. [ON/OFF] (Power) [ ] Use [ ], [ ], [ ], and [ ] to select the language you want and then press [SET]. [ [ ] [ ] [ ] [SET] ] (Movie) 3.
Using the mode dial There are 5 modes can be set by turning the Mode dial, such as Voice REC, Intelligent Scene, Scene mode, Record Mode, ART mode. Once turning the Mode dial, it will enter the selected mode immediately even in Playback mode or during movie recording.For detail operation, please see the following sections. The table below shows the available settings for Mode dial. Voice REC Intelligent Scene This mode is used to record audio clips.
Using the Control Panel 1. In the , press [SET]. This will select one of the Control Panel icons and display its settings. [ ][ ][ ][ ] Available settings Control Panel [SET] 2. 1 2 3 4 5 6 7 8 9 Use [ ] and [ ] to select the setting you want to change.
To record a movie 1. Configure the quality setting for the movie . The length of the you can record will depend on the quality setting you select. 2. In the REC mode, point the camera at the subject and then press [ ] (Movie). [ Remaining recording time ] (Movie) This will start recording and display on the monitor screen. Movie recording includes monaural audio. 3. Press [ ] (Movie) again to stop recording.
4. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settings of the scene you selected remain in effect until you select a different scene. • To select a different Scene Mode scene, repeat the above procedure from step 1. 5. Press the shutter button (if you are ) or (Movie) (if you are ).
Using On-screen Menus • Example REC Menu Screen Operation 1. 2. [ ][ ][ ][ ] In the REC mode, press [SET]. Use [ ] and [ ] to select the second Control Panel option from the bottom (MENU) and then press [SET]. This will display the REC menu screen. 3. 4. 5. 6. [SET] Use [ ] and [ ] to select the tab where the menu item you want to configure is located. Use [ ] and [ ] to select the menu item you want, and then press [ ]. Use [ ] and [ ] to change the setting of the selected menu item.
Using the PLAY Panel Pressing [SET] in the PLAY mode will display the PLAY Panel. • Example PLAY Panel Operation 1. In the PLAY mode, press [SET]. [ ][ ] PLAY Panel The PLAY Panel will appear along the right side of the monitor screen. 2. 3. Use [ ] and [ ] to select the PLAY Panel item you want, and then press [SET]. [SET] The following describes the operations you can perform for each of the PLAY Panel items. Exit Exits the PLAY Panel.
