HP Photosmart M730 series Digital Camera User Guide 6.
Legal and notice information © Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Windows® is a U.S.
Contents 1 Getting started Camera top and back ................................................................................................................3 Camera front, side, and bottom..................................................................................................4 Before taking pictures.................................................................................................................4 Install the batteries..............................................................
5 Using the Design Gallery Menu Applying artistic effects.............................................................................................................22 Modifying colors........................................................................................................................23 Adding borders.........................................................................................................................23 Cropping images..................................................
1 Getting started Use this section to get familiar with camera controls, set up your digital camera for use, and begin taking pictures. Camera top and back 1 2 3 4 5 6 7 8 11 1 10 9 Power light. 2 button. 3 Shutter button. 4 Delete button—Accesses the Delete function while in Instant Review (see “Instant Review” on page 9 and Playback (see “Deleting images” on page 19). 5 Flash button— Accesses the flash settings while in the flash” on page 13).
Chapter 1 Camera front, side, and bottom 1 2 3 6 5 4 1 Flash. 2 Microphone. 3 Self-Timer light (see “Using the Self-Timer setting” on page 16). 4 Tripod mount. 5 Dock/USB connector—Provides direct and indirect (via optional dock) USB connectivity. 6 Battery/Memory Card door. Before taking pictures Complete the following procedures before taking pictures or recording video clips. Install the batteries 1.
Choose the language Use press to choose the language you want, then . To change the language later, use the Camera Setup Menu (see “Using the Camera Setup Menu” on page 33). Set the region Along with the language setting, the region setting determines the default date format. Use .
Chapter 1 Install and format an optional memory card This camera supports standard, high speed, and high capacity Secure Digital (SD and SDHC) memory cards, 32MB to 8GB. 1. Turn off the camera and open the Battery/Memory Card door. 2. Insert the memory card in the smaller slot as shown. Make sure the memory card snaps into place. 3. Close the Battery/Memory Card door and turn on the camera.
experience, periodically check this website for updates to your camera's firmware, software, and drivers. To learn about Windows Vista support for your camera, see www.hp.com/go/ windowsvista (English only). Windows: 1. Close all programs and temporarily disable any virus protection software. 2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen instructions. If the installation screen does not appear, click Start, click Run, type D: \Setup.
2 Taking pictures and recording video clips You can take pictures when you are in Picture Capture and you can record video when you are in Video Record. Slide to to take pictures or to to record video clips. The Image Display resembles the following: 1 2 12 0:15 • • Picture Capture indicator. Video Record indicator. • • When taking pictures, pictures remaining count. When recording video clips, time remaining. 3 Battery level indicator (see “Power indicators” on page 42).
Recording video clips You can record a video clip when the camera is set to Video Record. 1. Slide to . 2. Frame the subject in the Image Display. 3. Press the Shutter button halfway down to measure focus and exposure. The focus brackets in the Image Display turn solid green when focus is locked (see “Auto focus and exposure” on page 9). 4. Press the Shutter button all the way down and release to begin recording video. 5. To stop recording video, press and release the Shutter button again.
Chapter 2 Focusing on the subject When you press the Shutter button halfway down, the camera searches for focus within the focus brackets. When it finds focus, the focus brackets turn green. If the focus brackets do not frame your subject, use Focus Lock (see “Using Focus Lock” on page 11). Optimizing focus When the camera cannot auto focus, the focus brackets turn red. This indicates the picture may be out of focus because the subject is out of the focus range or the scene has low contrast.
Using Focus Lock Use Focus Lock to focus on a subject that is not in the center of the picture, to capture action shots more quickly by pre-focusing in the area where the action will occur, or to focus in low light or low contrast situations. 1. Frame the subject for your picture within the focus brackets. In low light or low contrast situations, frame a brighter or higher contrast object. 2. Press the Shutter button halfway down. 3. Hold the Shutter button halfway down and reframe. 4.
Chapter 2 Optical zoom Optical zoom moves the lens between wide angle (1x) and telephoto (3x). While in Picture Capture or Video Record, use the buttons on the Zoom lever to control zoom. Press to zoom in to zoom out. and NOTE: You can set the optical zoom to the position you want just before recording video clips. However, you cannot use optical zoom while the video clip is recording.
3 Setting options for taking pictures and recording video clips Your camera's default settings work well for most shooting situations. For some situations, however, the features described in this chapter can improve the pictures you take and the video clips you record.
Chapter 3 Using the Picture Capture and Video Record menus The Picture Capture and Video Record menus allow you to adjust camera settings that affect the characteristics of the pictures and video clips you capture. The Picture Capture Menu displays only those features available for taking pictures while the Video Record Menu displays only features available for recording video clips. 1. Slide to or , then press . 2. Use to highlight an option, then press to display the option’s menu. 3.
(continued) Image Quality ( only)—Sets resolution and compression for images. The greater the number, the higher the resolution. The setting remains in effect until it is changed, even when you turn off the camera. • • • • • 8MP Best—For enlarging or printing images greater than 41 x 51 cm (16 x 20 in). Normal (8MP) (Default)—For printing images up to 41 x 51 cm (16 x 20 in). 5MP—For printing images up to 28 x 36 cm (11 by 14 in). 2MP—For printing images up to 13 x 18 cm (5 by 7 in).
Chapter 3 software” on page 6), you can also stitch panoramas automatically as you transfer them to your computer. 1. While in the Picture Capture Menu, use to highlight Shooting Mode, . then press 2. In the Shooting Mode menu, use to highlight either Panorama (left to right) or Panorama (right to left), press , then press repeatedly until you return to Picture Capture. 3. Press the Shutter button to take the first picture in the panoramic sequence. 4. Position the camera to take the second picture.
Using the Burst setting Burst allows you to take two or more pictures as quickly as possible when you press and hold the Shutter button all the way down. 1. While in the Picture Capture Menu, use to highlight Burst, press , highlight On, press , then press repeatedly until you return to Picture Capture. 2. Frame the subject, then press the Shutter button halfway down to lock the focus and exposure. Then press the Shutter button all the way down and hold it.
4 Reviewing images and video clips You can review and manipulate images and video clips in Playback as described here. For information about enhancing images, see “Using the Design Gallery Menu” on page 22. 1. Slide to . to scroll through your images and video clips. 2. Use Press to view video clips; press to pause a clip. When paused, use through the individual frames; press to resume playing the video.
Deleting images To delete a displayed image during Playback: 1. Press . 2. Use to select an option, then press . • This Image—Deletes the image or video clip. • All Except Favorites—Deletes all images except those tagged as Favorites. This menu option only appears if you have images tagged as Favorites (see “Tagging images as Favorites” on page 21). • All Images (in Memory/on Card)—Deletes all stored images and video clips.
Chapter 4 Using the Playback Menu 1. While in Playback, press . 2. Use to highlight an option. 3. Use to select an image or video clip, press instructions. , and follow any on-camera NOTE: To hear audio associated with video clips, transfer them to your computer (see “Transferring and printing images” on page 25). 4. To exit the menu, press repeatedly until you return to Playback. Remove Red Eyes—Allows you to remove red eyes in images containing human subjects (see “Removing red eyes” on page 20).
Tagging images as Favorites Tagging an image as a Favorite allows you to quickly select the group of images tagged as Favorites for printing or viewing as a group. 1. While in Playback, use to scroll to an image, then press . 2. Use to highlight Favorites, press , then press again to tag the displayed image. This Image is checked in the Favorites menu. To untag the again. image as a Favorite, press 3. For each additional image you want to tag as a Favorite, use to display the image, then repeat Step 2. 4.
5 Using the Design Gallery Menu You can use the Design Gallery features to enhance your captured images. 1. While in Playback, use to scroll to an image, then press . 2. Use to highlight Design Gallery, then press . 3. Use to highlight an option, then press and follow any on-camera instructions. Apply Artistic Effects—Allows you to apply an artistic effect to an image (see “Applying artistic effects” on page 22).
Modifying colors TIP: If you plan to modify colors, do so before adding a border. Modify Color allows you to apply color schemes to the displayed image. To modify colors: 1. Use to select Modify Color, then press . 2. Use to select a color scheme and preview the effect it has on the image. • Black & White—Converts color images to black and white. • Sepia—Converts image to a brownish tone to look old-fashioned. • B&W Tints—Applies color tones on a black and white version of an image. 3.
Chapter 5 1. Use to select Crop, then press . 2. Use to select a crop orientation and preview the effect it has on the image. • Landscape (Default)—Horizontally crops the displayed image to a 3:2 aspect ratio (one third wider than tall). • Portrait—Vertically crops the displayed image to a 2:3 aspect ratio (one-third taller than wide). • Help...—Accesses the on-camera help topic for cropping images. Follow the on-camera instructions to use the Zoom lever and adjust what appears in the cropped image.
6 Transferring and printing images Regularly transferring images to your computer and deleting them from the memory card will reduce the time it takes to turn on your camera, to review images, and to transfer images. You can transfer pictures and video clips with or without the HP Photosmart Software that came with your camera. However, the HP Photosmart Software has several features for transferring and managing your images and also guides you through the transfer process.
Chapter 6 3. Connect the camera and computer using the USB cable that came with your camera. 4. Turn on the camera. When the Image Display indicates that the camera is connected to the computer, follow the instructions on the computer screen. For more information, see the Help feature in the HP Photosmart Software. NOTE: If the camera does not successfully connect to the computer, see “My camera stalls when establishing a connection to the computer.” on page 38.
Using a memory card reader You can put your camera’s optional memory card into a (separately purchased) memory card reader. Some computers and HP Photosmart printers have built-in memory card slots which act as a memory card reader. 1. Insert your camera’s memory card into the memory card reader (or into your computer’s memory card slot, if your computer has one). 2. Your computer's provided image transfer software starts automatically and guides you through the process of transferring images. 3.
Chapter 6 4. When the Image Display on the camera shows an image: to display an image you want to • If you want to print one or more images, use to specify the number of copies, then press . In the Print print, use . Options menu, highlight Print This Image Now, and press • If you want to print a group of images or modify the printer settings, press , highlight Print Menu..., then press again. Highlight the option you want.
7 Using HP Photosmart Express With HP Photosmart Express, you can select pictures in your camera to print automatically (see “Marking images for printing” on page 29), to buy prints online (see “Buying prints online” on page 30), or to send to custom destinations (see “Sharing images” on page 31) the next time you connect the camera to your computer or printer. You must have the HP Photosmart Software installed on your computer to use some features in the Photosmart Express Menu.
Chapter 7 individual images, all images, or groups of images tagged as Favorites (see “Tagging images as Favorites” on page 21). 1. While in the Photosmart Express Menu, use to highlight Print, then . press Print menu, highlight an option, then 2. In the . press • This Image—Marks the image currently displayed. You can scroll to a different image using . • All Favorites...—Displays the Print All . This option is Favorites entry.
4. When you are done marking images for which you want to buy prints, press repeatedly until you return to Playback. 5. To buy prints of the images you selected, see “Transferring images with HP Photosmart Software” on page 25. Sharing images You can customize the Share menu to include e-mail addresses, group distribution lists, or other online services. You can then select images to send to these destinations.
Chapter 7 tagged more than one image as a Favorite (see “Tagging images as Favorites” on page 21). • All Images...—Displays a list of destinations. Highlight each destination to which you want to send all images, pressing to select each destination. After selecting destinations, press . This option is available only if you have more than one image in the camera. 3. To select additional images to share, use to display an image, then repeat Step 2. 4.
8 Using the Camera Setup Menu The Camera Setup Menu allows you to set preferences for the camera’s behavior. The Camera Setup Menu is available from the Picture Capture, Video Record, and Playback menus. 1. While in the Picture Capture, Video Record, or Playback menu, use to highlight Camera Setup..., then press . 2. Use to highlight a menu option, then press to display the menu option’s submenu. 3. Use to highlight a setting, then press . 4.
9 Troubleshooting Use this section to find information on: • • Resetting the camera (see “Resetting the camera” on page 34) Possible problems and solutions (see “Problems and solutions” on page 34) Resetting the camera If your camera does not respond when you press buttons, reset the camera. 1. 2. 3. 4. Turn off the camera. Remove the memory card and batteries for at least 5 seconds. Reinsert the batteries and close the Battery/Memory Card door. Turn on the camera.
I have to recharge the NiMH batteries frequently. • New batteries or batteries that have not been charged recently must be recharged to reach full capacity. • If you have not used the batteries for two months or longer, recharge them. • For tips on conserving battery life, see “Extending battery life” on page 41. The NiMH batteries will not charge. • Try charging the batteries again after they have drained awhile.
Chapter 9 My image is blurry. • Use Focus Lock (see “Using Focus Lock” on page 11). • Use a tripod to hold the camera steady, or improve lighting conditions. • Use Steady Photo shooting mode (see Steady Photo under “Using the Picture Capture and Video Record menus” on page 14). Auto Flash or Flash On and set the shooting mode to • Set the flash to Action. My image is too bright. • Turn the flash off (see “Setting the flash” on page 13). • Move back from the subject and use zoom. My image is too dark.
I have two memory cards that are the same size, but one stores many more pictures than the other. • Your memory card may contain files that are not images or videos recognized by the camera. Save any data on the memory card that you want to keep, then format the memory card (see “Install and format an optional memory card” on page 6). • If your memory cards are 4GB or larger, the card that stores fewer images may have been improperly formatted by a device that does not support 4GB or larger cards.
Chapter 9 Video recording terminates abruptly and the video will not play back. • Remove the memory card and see if the video is stored in internal memory. If so, transfer the video to a memory card (see Move Images to Card under “Using the Playback Menu” on page 20) or to your computer (see “Transferring and printing images” on page 25).
The HP Photosmart Software takes a long time before it is ready to transfer images from my camera. Having a large number of files stored on an optional memory card affects the amount of time it takes for the HP Photosmart Software to start transferring images. Transfer all images stored on the memory card, then format the card (see “Install and format an optional memory card” on page 6). My camera shuts down unexpectedly. • A power surge or electrostatic discharge may have affected the camera.
10 Product support Use this section to find support information for your digital camera, including links to helpful websites and an overview of the support process. Helpful websites Camera tips, product registration, newsletter subscriptions, driver and software updates, purchase HP supplies and accessories www.hp.com Customers with disabilities www.hp.com/hpinfo/community/accessibility (English only) Hewlett-Packard Technical Support; firmware, software, and driver updates; support information www.
A Managing batteries Your camera uses two AA batteries, either Alkaline, Photo Lithium, or rechargeable Nickel Metal Hydride (NiMH). Photo Lithium and NiMH batteries provide longer battery life than Alkaline batteries. Top points about batteries • • • • • • The batteries shipped with your camera are AA Alkaline. These batteries have a short life and are intended to let you begin using your camera immediately.
Appendix A • • • • • • Do not pierce batteries or subject them to strong impacts or shocks. Do not solder directly onto batteries. Do not allow batteries to get wet. Do not disassemble or modify batteries. Immediately discontinue use of a battery if, while using, charging, or storing the battery, the battery emits an unusual smell, feels excessively hot (note that it is normal for the battery to feel warm), changes color or shape, or appears abnormal in any other way.
The following table shows how Alkaline, Photo Lithium, and rechargeable NiMH batteries perform in different types of use scenarios: Type of Use Alkaline Photo Lithium NiMH Most economical if you take more than 30 pictures per month Poor Fair Good Most economical if you take fewer than 30 pictures per month Fair Good Fair Heavy use of flash, frequent pictures Poor Good Good Heavy use of video Poor Good Good Heavy use of Image Display Poor Good Good Overall battery life Poor Good Fa
B Specifications Resolution Pictures: • 7.7MP (3200 by 2400) effective pixel count • 8MP (3264 by 2448) total pixel count Video clips (QVGA): 320 by 240 total pixel count, 24 frames/sec Sensor Diagonal 7.26 mm (1/2.5-inch, 4:3 format) CCD Color depth 36 bit (12 bits by 3 colors). 36 bit images are transformed into an optimized 24 bit image and stored in the JPEG format.
(continued) Compression format • • JPEG (EXIF) for pictures Motion JPEG for video clips Interfaces USB mini-B Standards • • • • • • • External body dimensions Measurements with camera off and lens retracted (width, depth, height): 96 mm (W) by 24 mm (D) by 62 mm (H) (3.77 in by .94 in by 2.44 in) Weight 225 grams (7.
Index A Action mode 14 Adaptive Lighting 14, 17 adding borders 23 AE Metering 15 apply artistic effects 22 arrow buttons 3 artistic effects 22 assistance 40 Auto mode 14 B Back button 3 batteries conserving 41 install 4 performance 42 top points about use 41 battery door 4 Beach mode 14 borders 23 Burst setting 15, 17 C camera dimensions 45 parts 3, 4 specifications 44 turn on/off 4 weight 45 Camera Setup Menu 33 Camera Sounds 33 Close-up mode 14 color depth 44 colors 23 compression format 45 computer, co
Index pictures 8, 16 Playback 18 Playback Menu 20 Portrait mode 14 power indicators 42 light 3 ON/OFF button 3 preview Panorama 21 print images 27, 29 prints, buy online 30 problems and solutions 34 R record video clips 9 red-eye removal 20 Region 5 remaining pictures count 8 removing red eyes 20 reviewing images 18 S safety precautions for batteries 41 selecting images for destinations 31 selecting images for printing 29 Self-Timer light 4 Self-Timer setting 14, 16 sending individual images 31 set date a
Regulatory / Geltende Richtlinien / Informations règlementaires Geräuschemission LpA < 70 dB Am Arbeitsplatz Normaler Betrieb nach DIN 45635 T. 19 FCC statement The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.