User Manual

ENWW Loading trays 43

Loading tray 2 or an optional 500-sheet tray

The 500-sheet tray adjusts for six standard sizes (letter, A4, legal,

executive, A5, and JIS B5), as well as for many custom sizes. (See

“Supported sizes and weights of paper” on page 183.) The printer

senses standard sizes if you set the tray guides to a standard size and

the paper knob to Standard.

If an optional stapler/stacker is installed, the printer automatically

rotates the printed images 180° on all paper sizes, even if the job is not

stapled. If you are printing on paper that requires a specific orientation

(such as letterhead, preprinted paper, prepunched paper, and paper

with watermarks), make sure that the paper is loaded correctly in the

tray. (See “Orientation of paper when a stapler is installed” on page 38.)

CAUTION

To avoid paper jams, do not load trays while the printer is printing.

To load tray 2 or an optional 500-sheet tray

1 Remove the tray from the printer.

2 Pinch the release that is located on the left guide and slide the side

guides to the correct paper size.

3 Pinch the release that is located on the rear paper guide and slide it

to the correct paper size.

4 On the right side of the tray, turn the knob to Standard for LTR

(letter), A4, LGL (legal), EXEC (executive), A5, or JIS B5 paper.

Turn the knob to Custom for supported custom paper sizes.