Installation Manual

12 Commercial in Confidence © Hexagon AB
5 QC1000 HxGN MineDiscover Smart
Antenna
5.1 Electrical Specifications
Parameter
Range
Note
Input power nominal
9-36VDC
Power consumption at 12V
nominal
350 mA
Interfaces
1x ETH, 2x CAN, 4x GPIO,
1x RS-232
For Ethernet, see par 5.6
GNSS
Multi-band GNSS module
with integrated multi-band
RTK, allowing for 4
concurrent constellations
RF
868/902-928 MHz
4 Hz refresh rate.
See also par 5.4
UWB ToF
integrated
See par 5.5
Wi-Fi
802.11 b/g/n 2.4GHz,
WPA2
Only the 2400 … 2483.5 [MHz] band
is active.
See par 5.7
Cellular
3G, 4G/LTE
See par 5.8
IMU
9-axis on-board:
Accelerometer / Gyroscope/
Magnetometer
Other sensors (MEMS)
Pressure, humidity,
temperature, ambient light
Data Storage / Memory
4GB SD-card
To store logfiles, settings and
configuration
GPIOs
4 General Purpose Input
and Output
To interact with actuators or sensors
outside the device.
See par 5.14