Installation Manual

© Hexagon AB Commercial in Confidence 31
Beacon Antenna
For vehicles that operate in regions of the mine where more than 30% of the view of the sky is
obstructed, this distance between main and beacon QC1000 shall be increased to 15 meters.
It is essential that both antennas are not obstructed by any part of the vehicle and have a
360° view of the horizon (except for terrain obfuscation).
Limitation
The center of rotation is assumed to be in the middle of the vehicle for the rotation
prediction. If there is a significant difference between the true axis of rotation and the
center a slight positional error will result.
7.7 Pre-Configuration
After mechanical installation and correct cabling, QC1000 must be pre-configured to connect to
the MPData Server. Once this pre-configuration is correctly done, QC1000 can be updated
remotely via the server and network.
7.8 Installation Verification
After installation, perform installation verification procedure as per below:
MAIN
DEVICE
PARAMETERS
YES
NO
COMMENT
INSULATED FROM GROUND
TWO 2 AMP FUSES ON POWER CABLE
DATE:
VEHICLE MODEL:
SITE:
VEHICLE ID:
TECHNICIAN:
DISPLAY:
ANTENNA: QC1000
QC1000 SERIAL NO:
CONFIG FILE RECEIVED FROM: