Installation Guide

SAFEmine Ltd | www.safe-mine.com | [e-mail] 25/39
SAFEmine (part of Hexagon Mining)
Baarerstrasse 133, CH-6300 Zug
Switzerland
www.hexagon.com
4.3. Displays
4.3.1. Prior Considerations
 The display should be positioned such that the front panel LEDs are in direct view of the
Operator, the acoustic warning tone can be heard loud and clearly and control button can be
operated easily.
 The view on the front panel display may not be obstructed at any time.
 The display may never interfere with the operation of the vehicle (incl. emergency
procedures)
 Special attention is required to not reduce the operator’s field of view.
 The displays can also be used with CAS MainUnits which do not explicitly require an external
display, e.g. QC235 and QC220. Please contact SAFEmine for more information regarding
this configuration.
 The remote display connection contains the data and power from the main unit.
4.3.2. QD200 Remote Display
 The QD200 Remote Display has a male M8 type
connector with 4 contacts. It connects to the QD221
and QD222 extension cables.
 To connect with QC230 or QC235 no further cables
are required. It can be connected directly to the
display interface of the CAS MainUnit.
 To connect with QC220, QC24X or QC250s, a
QR106 Y-cable is required in order to connect to the
main interface of the CAS Main Unit.
 The back side of the display’s aluminum housing
M8 Mounting Hole M8 Serial Connector