Product Manual

15/28
Hexagon Mining
Lindenstrasse 4
6340 Baar, Switzerland
www.hexagonmining.com
4.3.3. Charging Procedure
Before charging the Pedestrian tags, please make sure the voltage of the power supply corresponds
to the data given on the gang charger instructions, usually Gang Charger can work from 110 to 240V
and make sure that the correct power adapter is used (5VDC supply voltage).
The charging procedure starts as soon as the Pedestrian Tag is inserted into any of the sockets of the
Gang Charger QT365 given that the battery temperature is within a safe range (10-45C). The
Pedestrian tag immediately starts charging the battery, which is displayed with different LEDs
indications explained below:
Meaning of Indication Elements:
All the indications are displayed on the inserted PEDESTRIAN TAG LEDs, and the different colors
and position of the turning LEDs represent the status of the charging progress of the PEDESTRIAN
TAG as explained in the table below:
Status Indication User Interface
Battery not Charging The right LED will be blinking every 2
second in RED color.
Battery Charging The right LED will be blinking in a
period of 2 second in BLUE color.
Fast Charging in
Progress
The right LED will be blinking in a
period of 0.5 second in BLUE color.
Battery Fully
Charged
The right LED will be constantly on in
GREEN color.