User's Manual

错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。
•
7

All the operations described in this document for which you are responsible must be performed in respect
of the national, local and company safety regulations.
In case of conflict with said directives, please contact Hexagon.
Purpose-conformant use
The jogbox is available as a tethered or wireless version. In any event, the wireless version shall be able
to be operated in a tethered configuration (Cable will supply power only). The wireless communications
between the jogbox and the PC as well as the wireless communications between the jogbox and the
controller shall be encrypted to avoid hacking or monitoring of signals. The Jogbox is used for operating
CMMs that are equipped with a DC and B3C controller. With the Jogbox you can move the axes manually
using the joysticks. In addition, you can input and transmit editing commands and commands to the
application software of the CMM.
Impermissible use
错误!未找到引用源。 identifies the location of the cell components.
EMERGENCY STOP
To initiate an emergency stop:
1. Press the emergency stop button till it clicks into the lower locked position.
The drives of the CMM are immediately stopped. A corresponding message regarding the fault is
shown in the display and notification area.
Recovering From an E-Stop:
Switch to the operating mode Switched on.
1. Rectify the cause of the emergency stop.


The current coordinates of the axes are shown in the display and notification area. The Jogbox
has to