Cordgrip Specifications

“Stay Connected” with Liquid Tight Cordgrips
®
3-19
1-800-526-4182 • 732-286-1800 (NJ) • FAX: [phone] • www.heyco.com
Quick
Specs
Material Nylon 6/6 with TPE Sealing Gland
Certifications Listed under Underwriters’ Laboratories File E51579
Recognized Under the Component Program of Underwriters’ Laboratories File E51579
Certified by Canadian Standards Association File 93876C
Flammability Rating 94V-2
Temperature Range Static -40°F (-40°C) to 239°F (115°C)
Dynamic -4°F (-20°C) to 212°F (100°C)
IP Rating IP 68 (70 PSI, 5 BAR)
• Wide range of approved cable
diameters.
• IP 68 rated.
• Acme threads on body prevent
skipping and speed installation.
• For use in clearance or threaded holes.
• All nylon construction with TPE sealing
gland resists salt water, weak acids,
gasoline, alcohol, oil, grease, and
common solvents. (This feature is not
assessed by UL.)
• Multiple sizes for flexible cord
diameters ranging from .069˝
(1,8 mm) to 1.000˝ (25,4 mm). For
larger sizes, see Heyco-Tite Liquid
Tight Cordgrips on page 3-1.
• We recommend using the cordgrip
with the smallest maximum diameter
that will fit your application. Cable
ranges listed are for the maximum
IP68 sealing range. Contact Heyco
for UL approved 514B cable ranges.
• Locknuts not included. For nylon
locknut specifications or to order
locknuts separately, see page 3-47.
• For Heyco Liquid Tight Threaded
Plugs, see page 3-51.
• Consult Heyco for cordgrips molded
in other colors.
Internal ratchet
provides self-locking
against vibration.
Domed sealing nut
resists snags, sheds
contaminants.
TPE compression
gland for sealing.
Collet design of
body accommodates
various size cords,
cables, tubing.
Acme threads
prevent skipping,
speed installation.
Special contour
provides light seal
at mounting panel
without O-ring.
Consult Heyco for your alternate material requirements!
Heyco
®
Original Series-35 Liquid Tight Cordgrips
Straight-Thru, NPT Hubs
CABLE DIA. RANGE PART NO. DESCRIPTION PART DIMENSIONS
Locknuts ABCDE
Minimum Maximum Not Included* or Clearance Max. O.A. Thread Wrenching Nut
Black Gray Hole Dia. Length Length Thk. Flat Size
in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm.
.
069 1,8 .187 4,7
3
458 3459
R
LTF 3/8
.670 17,0 1.49 37,8 .53 13,5 .20 5,1 .75 19,1
.
115 2,9 .312 7,9
3
228 3229
L
TF 3/8
.170 4,3 .450 11,4
3
231 3232
LTF 1/2 .875 22,2 1.72 43,7 .62 15,7 .20 5,1 .95 24,1
.230 5,8 .546 13,9
3200 3201 LLTF 1/2 .875 22,2 1.83 46,5 .62 15,7 .23 5,8 1.05 26,7
.250 6,4 .485 12,3
3
204 3205
MRLTF 1/2
.875 22,2 1.97 50,0 .63 16,0 .23 5,8 1.30 33,0
.450 11,4 .709 18,0
3
202 3203
MLTF 1/2**
.
250 6,4 .485 12,3
3460 3461 R
LTF 3/4
1.068 27,1 1.97 50,0 .63 16,0 .23 5,8 1.30 33,0
.
450 11,4 .709 18,0
3
234 3235
L
TF 3/4
.590 15,0 1.000 25,4
8437 8438 LTF 1 1.350 34,3 2.42 61,5 .75 19,1 .28 7,1 1.65 41,9
Standard colors black and gray.
*To order Nylon or Metal Locknuts separately, see pages 3-47 and 3-48.
**For cable diameters greater than .600˝, the insulating jacket must be stripped back. Reference customer drawing 3202/3203.
For larger sizes, see Heyco-Tite Liquid Tight Cordgrips on page 3-1.
E
D***
B
C
SEALING NUT
A
SUGGESTED CLEARANCE HOLE
FOR NONTHREADED MOUNTING