Parts List

13
FINAL INSTALLATION
Note: Closemount installation will not have the downrod (A) or canopy cover (F). Downrod (A)
is shown/referenced, but instructions are applicable to both standard and closemount-style
installations.
1. Read and discard the paper tag attached to the wire
hooks of the mounting bracket (E). Wrap the wire
harness coming from the downrod (A) around the
wire hooks.
Important: Ensure the wire harness is supported
by the wire support to prevent damage to the wire
harness during canopy installation.
Note: Extra wire harness length accommodates
longer downrods.
2. Connect the wire harness from the downrod (A) to the
wire harness from the receiver from remote pack (P).
1
2
A
E
A
Wire
Support
Wire
Harness
Wire Hook
Wire Harness