TDS

MATERIAL SAFETY DATA SHEET
MSDS DATE: Feb-2011
PAGE 2 OF 5
INGESTION: unlikely
INHALATION: May cause discomfort in nose and throat
ACUTE HEALTH HAZARDS: Not applicable
CHRONIC HEALTH HAZARDS: Not applicable
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
Available toxicological information and the physical/chemical properties of the material suggest that there is no evidence that this
product aggravates an existing medical condition.
Carcinogenicity: NTP: No IARC: No OSHA: No
SECTION 3 NOTES:
SECTION 4: FIRST AID MEASURES
EYES: Immediately flush eyes with water for at least 15 minutes. Do not rub the eyes.
If irritation develops, consult a physician.
SKIN: Wash affected skin areas with soap and water. If irritation develops, get medical attention immediately
INGESTION: unlikely
INHALATION: Remove subject to fresh air. If symptoms develop, seek immediate medical attention.
NOTES TO PHYSICIANS OR FIRST AID PROVIDERS: Treat symptomatically and supportively.
SECTION 4 NOTES:
Never give anything by mouth to an unconscious person.
SECTION 5: FIRE-FIGHTING MEASURES
FLAMMABLE LIMITS IN AIR, UPPER: Not applicable
(% BY VOLUME) Not applicable LOWER: Not applicable
FLASH POINT: Not applicable
EXTINGUISHING MEDIA: Dry chemical, foam water, or carbon dioxide
SPECIAL FIRE FIGHTING PROCEDURES: In the event of a fire, wear NIOSH approved, positive pressure, self-contained breathing
apparatus (SCBA) and full protective clothing. Evacuate all personnel from danger area. Use dry chemical, foam, water or carbon
dioxide to extinguish fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS: This product is nonflammable and nonexplosive under normal conditions of use.
It will not continue to burn after ignition without an external fire source. When forced to burn, the major gaseous products of the
combustion of PVC are carbon monoxide, carbon dioxide, and hydrogen chloride.
SECTION 5 NOTES:
SECTION 6: ACCIDENTAL RELEASE MEASURES
ACCIDENTAL RELEASE MEASURES:
Response to Spills: Not applicable
SECTION 7: HANDLING AND STORAGE
HANDLING AND STORAGE: Use with care. Wear gloves if necessary when cutting or fabricating. Store in a cool dry, well-ventilated
area away from sources of extreme heat or fire.
OTHER PRECAUTIONS: Use any methods that keep dust to a minimum. General storage procedures are acceptable