Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
354
22.2.1
Valid (Bit 7 of byte 0)
0
The Information Bytes (byte 3 through 6) are not defined.
1
The Information Bytes (byte 3 through 6) contain a valid logical block address.
22.2.2
Response Code (Bit 6 - 0 of byte 0)
70h
Current Error. See section 22.1.3 "Sense Data Response Code" for more details.
71h
Deferred Error. See section 22.1.3 "Sense Data Response Code" for more details.
22.2.3
ILI: Incorrect Length Indicator (Bit 5 of byte 2)
The ILI bit is valid for the Read Long (3Eh) command and Write Long (3Fh) command only. ILI set to one and Valid
Bit set to one indicates that the requested logical block length does not match the logical block length of the data on
the medium for a Read Long or Write Long command. The Information field contains residue information about the
error. ILI set to zero indicates there is no incorrect length condition.
0
No Incorrect Length condition.
1
Incorrect Length Indicated.
Table 306 Incorrect Length Indicator
Valid ILI
Command = Read
Long or Write Long
Description
x
0
x
No incorrect length condition
1 1 yes Requested Logical block Length does not match the logical block
length of the data on the disk