Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
38
9
DC Power Requirements
The following voltage specification applies at the drive power connector. Connections to the drive should be made in
a safety extra low voltage (SELV) circuit. There is no power on or power off sequencing requirement.
Adequate secondary over-current protection is the responsibility of the system.
Table 16 Input Voltage And Capacitance
Supply Tolerance
Absolute Max
Spike Voltage
Supply Rise Time Capacitance
5 V +/- 5% 5.5 V 0-200 ms 51 uF
12 V +/- 5% 15 V 0-400 ms 14 uF
Note: -8% is acceptable during spin up, but the spin up time is not guaranteed.