Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
453
Abbreviations, 90
Active Notch
, 181
Additional information, 301, 420
Additional Sense Length (Byte 7), 357
Alternate Tracks per Logical Unit, 170
Alternate Tracks per Zone, 170
Appendix, 420
Automatic Read Reallocation Enabled, 163
Automatic Rewrite/Reallocate, 314
Automatic Write Reallocation Enabled, 163
Block Descriptor, 159
block format, 96, 97
buffer overrun, 150
buffer underrun, 150
Byte ordering conventions, 90
bytes from index format, 97
Command Information Unit, 78
Command Processing During Execution of Active I/O
process, 302
Command Processing During Startup and Format
Operations, 305
Command processing while reserved, 311
Command queuing, 313
Command Queuing, 313
Command reordering, 314, 316, 317, 318, 321, 323, 326,
327, 332, 334, 335
Command Reordering, 314, 316, 317, 318, 321, 323, 326,
327, 332, 334, 335
Command Time out Limits, 321, 326, 327
Concurrent I/O Process, 314
DATA Information Units, 82
Data Recovery Procedure, 324
defect descriptor, 95
Defect Descriptor, 96
defect list, 93
Deferred Error Condition, 305
Degraded Mode, 306, 311, 327
device cache fast writes, 151
device cache partial read hits, 151
device cache write hits, 151
Diagnostics, 318, 321, 323, 326, 327, 332, 334, 335
Disable Block Descriptor, 156
Download Microcode and Save (Mode 0101b), 289
Drive Service Strategy, 323, 325, 326, 327, 328, 329, 330,
331
FC-AL attachment, 61, 332, 353, 420
Format Time, 321
format unit, 91, 311
FORMAT UNIT, 91, 311
Grown Defect List (Glist), 223
Idle Time Function, 321
Incorrect Length Indicator (Bit 5 of byte 2), 355
inquiry, 99
Internal Error Condition, 305
Link Reset Sequence, 65, 66, 70, 75, 82, 83
Log Page Parameters, 124
LOG SELECT, 120
LOG SELECT (4C), 120
LOG SENSE, 123
LOG SENSE (4D), 123
Logical Block Cache Segment Size, 175
Maximum Burst Size, 168
Maximum Pre-fetch
, 175
Maximum Pre-fetch Ceiling
, 175
Merge G-List into P-List, 161
Minimum Pre-fetch
, 175
Mode Pages, 316
MODE SELECT, 154
MODE SELECT, 155
MODE SELECT (15), 154
MODE SELECT (55), 155
MODE SENSE (1A), 156
MODE SENSE (5A), 196
OPEN Address Frame, 73
overrun counter, 150
Overview, 316
Page Code Valid, 232
Page Format
, 255
Parameter data for Read Keys, 198
Parameter list, 202
PERSISTENT RESERVE OUT, 200
PERSISTENT RESERVE OUT (5F), 200
Persistent Reserve Out Parameter list, 202
PHY Error Handling, 69
physical sector format, 98
Physical Sector Format (101b), 225
Post Error, 163
PRE-FETCH, 205, 206
Primary Defect List, 223
Priority commands, 313
Priority Commands, 313
Queue Depth, 313
Queue Full Status, 313
Random Vibration, 53
READ (10) - (28), 208
Read Ahead, 316
READ BUFFER (3C), 214
Read Buffer Full Ratio
, 168
Read Cache Disable, 175
READ CAPACITY, 220
READ CAPACITY command, 220
Read Continuous, 163
READ DEFECT DATA (37), 223
READ DEFECT DATA (B7), 226
READ LONG command, 228, 229
Read Retry Count
, 164
REASSIGN BLOCKS (07), 230, 325
Reassignment Time, 321
RECEIVE DIAGNOSTICS (1C), 232
Recommended Initiator ERP, 323
RELEASE (17), 235
RELEASE (57), 236
REPORT LUNS (A0), 246
Report Recovered Non Data Errors, 161
REQUEST SENSE (03), 249, 353
RESERVE (16), 250
RESERVE (56), 251
Reserved Area
, 233
Reset, 317, 318, 321, 323, 326, 327, 332, 334, 335
Reset Actions, 317
RESPONSE Information Units, 84, 86, 87, 93, 95, 96, 124,
125, 126, 128, 130, 131, 132, 134, 135, 137, 197, 198,
199, 200, 201, 202, 203, 215, 216, 217, 220, 221, 224,
225, 226, 227, 232, 254, 257, 288, 289, 291