Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
58
16
Safety Certification
The following shows the safety standards for different countries.
16.1
UL and CSA Standard Conformity
This drive is used as a component in Information Technology Equipment (ITE) business equipment systems. This
drive is certified for use in the United States per UL 60950-1, Second Edition, 2011-12-19 and in Canada per CSA
C22.2 No. 60950-1-07, Second Edition, 2011-12. The cRUus UL component recognition mark is specifically used on
component parts that are part of a larger product or system and indicates compliance with both Canadian and U.S.
requirements. The recognition mark appears on the drive label and is maintained for the life of the product.
16.2
European Standards Compliance
This product is additionally certified to the following standard:
International Electrotechnical Commission (IEC) Safety Standard:
IEC 60950-1:2005, Second Edition + A1:2009 (IECEE CB Scheme)
16.3
German Safety Mark
This product has received the TUV Bauart Certification mark under EN 60950-1:2006 with Am. 11 (2009) +
Am1:2010 + A12:2011, Second Edition safety standard. The GS mark is not applicable to internal subsystem drives.
16.4
Flammability
The printed wiring boards, flex cables, and connectors used in this drive meet or exceed the UL minimum
flammability classifications listed in the table below.
The flammability ratings are marked on the printed wiring boards and flex cables
Component Flammability Rating
Rigid Printed Wiring Board Min. V-1
Flex Cable - no components Min. V-2
Interface & motor connectors Min. V-2
16.5
Corporate Standards Compliance
This product has been designed to meet the following Corporate Standards:
- NB 3-0501-201 Product Safety, National Requirements-All Countries.
- CS 3-0501-070 Electrical, Mechanical and Flammability
- NB 3-0501-033 Product Safety National Certification Conformity Requirement
- CS 9700-020 Eco-Product Design Requirement