Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
100
18.5.1.2
Inquiry Data Format - EVPD = 1 - Page Code = 00h
Table 72 Inquiry Data - EVPD = 1 (Page Code = 00h)
Byte
Bit
7
6
5
4
3
2
1
0
0
Qualifier = 0
Peripheral Device Type = 0
1
Page Code = 00h
2
Reserved = 0
3
Page Length = 0Eh
4
Supported Page Code - 00h
5
Supported Page Code - 03h
6
Supported Page Code - 80h
7
Supported Page Code - 83h
8
Supported Page Code = 86h
9
Supported Page Code = 87h
10
Supported Page Code = 88h
11
Supported Page Code 8Ah
12
Supported Page Code 90h
13
Supported Page Code 91h
14
Supported Page Code B0h
15
Supported Page Code B1h
16
Supported Page Code B2h
17
Supported Page Code D1h
18
Supported Page Code D2h
- Qualifier is set to zero to indicate that the LUN specified in the Command Block is currently supported.
- Peripheral Device Type is set to zero to indicate that the device is Direct Access.
- Page Code is set to 0, and this field contains the same value as in the page code field of the INQUIRY
command descriptor block.
- Page length specifies the length of the following page data.
- Supported Page Code field contains the Page Codes supported by the Target. The list is in ascending order.