Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
137
Table 113 Medium Scan Parameter structure
Byte
Bit
7
6
5
4
3
2
1
0
0-1
Parameter Code = 0001h - 0800h
2
DU=0
DS=0
TSD=0
ETC=0
TMC=0
F&L = 11b
3
Page Length = 14h
4-7
Power On Minutes
8
Reassign Status
Sense Key
9
Additional Sense Code
10
Additional Sense Code Qualifier
11
Head
(MSB) Cylinder
12-13
(MSB)
Cylinder
(LSB)
14-15
(MSB)
Sector
(LSB)
16-23
LBA
- Power On Minutes indicates the total power on minutes at the time the error was detected.
- Reassign Status is set as shown below. Reassignment during the background scan is not supported.
Table 114 Reassign Status
Reassign Status
Description
0h
No reassignment needed
This value is not reported, if LOWIR bit is set to 1 in Background Control Mode Page.
1h
Reassignment pending receipt of Reassign command or write command (if auto write
reallocation is allowed) from the initiator
02h-4h
Not supported
5h
Error was detected by BGMS, and was successfully rewritten.
This value is not reported, if LOWIR bit is set to 1 in Background Control Mode Page.
6h
Error was detected by BGMS, and was successfully reassigned by Application Client.
Contains valid data.
7h – Fh
Reserved
Additional Sense Code and Additional Sense Code Qualifier provide details about the error detected.