Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
164
0 1 0 0
Illegal Request-DTE must be zero when PER is zero.
0 1 0 1
Illegal Request-DTE must be zero when PER is zero.
0 1 1 0
Illegal Request-DTE must be zero when PER is zero.
0 1 1 1
Illegal Request-DTE must be zero when PER is zero.
1 0 0 0
The highest level error is reported at the end of transfer. Retries and error correction are
attempted. Recovered or corrected data (if any) or both are transferred with Check
Condition status and Recovered Error sense key set at the end of the transfer.
no err
The transfer length is exhausted.
soft err
The transfer length is exhausted. Transferred data includes blocks containing
recovered errors. The information byte in the sense data will contain the LBA
of the last recovered error.
hard err
Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is not transferred to the Initiator. The drive then creates
the Check Condition status with the appropriate sense key.
1 0 0 1
The highest level error is reported at the end of transfer. Retries and error correction are
attempted. Recovered or corrected data (if any) or both are transferred with Check
Condition status and Recovered Error sense key set at the end of the transfer.
no err
The transfer length is exhausted.
soft err
The transfer length is exhausted. Transferred data includes blocks containing
recovered errors. The information byte in the sense data will contain the LBA
of the last recovered error.
hard err
Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is not transferred to the Initiator. The drive then creates
the Check Condition status with the appropriate sense key.
1 0 1 0
The highest level error is reported at the end of transfer. Retries are attempted but LDPC is
not applied. Recovered or corrected data (if any) or both are transferred with Check
Condition status and Recovered Error sense key set at the end of the transfer.
no err
The transfer length is exhausted.
soft err
The transfer length is exhausted. Transferred data includes blocks containing
recovered errors. The information byte in the sense data will contain the LBA
of the last recovered error.
hard err
Data transfer stops when an unrecoverable error is encountered. The
unrecoverable block is not transferred to the Initiator. The drive then creates
the Check Condition status with the appropriate sense key.
1 0 1 1
The highest level error is reported at the end of transfer. Retries and error correction are
attempted. Recovered or corrected data (if any) or both are transferred with Check
Condition status and Recovered Error sense key set at the end of the transfer.
no err
The transfer length is exhausted.
soft err
The transfer stops on the first soft error detected. The information in the sense
data shall contain the LBA of the block in error.
hard err
Data transfer stops on the unrecoverable error. The unrecoverable error block
is not returned to the Initiator. The drive then creates the Check Condition
status with the appropriate sense key.
1 1 0 0
The highest level error is reported at the end of transfer. Retries and error correction are
attempted. Recovered or corrected data (if any) or both are transferred with Check
Condition status and Recovered Error sense key set at the end of the transfer.
no err
The transfer length is exhausted.
soft err
The transfer stops on the first soft error detected. The information in the sense
data shall contain the LBA of the block in error.
hard err
Data transfer stops on the unrecoverable error. The unrecoverable error block
is not returned to the Initiator. The drive then creates the Check Condition
status with the appropriate sense key.
1 0 1 1
The highest level error is reported at the end of transfer. Retries and error correction are