Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
308
20.1.9.4
Response to SCSI Command in Degraded Mode - Spindle
Stopped by Unit Stop Command
Table 277 Spindle Motor Degraded Mode - Spindle Stopped by Command
Command (w/Option)
Response
Request Sense
Executed. The Target may return Sense Key 02h (Not Ready) ASC/ASCQ 0402h
(Initialize Command Required)
Inquiry (EVPD=0)
Executed
Inquiry (EVPD=1)
Executed
Test Unit Ready
Executed and Check Condition is returned with Sense Key 02h (Not Ready)
ASC/ASCQ 0402h (Initialize Command Required)
Start Stop Unit
(Start)
Executed
- Success: Good Status is returned. Motor Degraded Mode is cleared
- Spindle Motor Start Failure: Check Condition with Sense Key 02h (Not Ready)
ASC/ASCQ 0400h (Start Spindle Motor Fail)
- Self Configuration Failure: Check Condition with Sense Key 02h (Not Ready)
ASC/ASCQ 4080h (Diag Fail- Bring up Fail)
Sense Key 02h (Not Ready) ASC/ASCQ 4085h (Diag Fail-RAM code NOT load)
Start Stop Unit
(Stop)
Executed. Good Status is returned. Motor Degraded Mode is NOT cleared
Other Commands
Not Executed. Check Condition Status is returned with Sense Key 02h (Not Ready)
ASC/ASCQ 0402h (Initialize Command Required)