Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
46
10.6
MTBF (Mean Time Between Failure): 2.0M hours.
This MTBF target is based on a sample population and is estimated by statistical measurements and acceleration
algorithms under nominal operating conditions. MTBF ratings are not intended to predict an individual drive’s
reliability. MTBF does not constitute a warranty.
10.7
Preventive Maintenance
None
10.8
Temperature Warning
Temperature Warning is enabled by setting the EWASC (Enable Warning Additional Sense Code) bit to 1 and setting
DEXCPT (Disable Exception Control) bit to 0 in Mode Page 1C. For mode page settings, refer to Section “Mode
Page 1C (Informational Exceptions Control)”. The warning is issued as sense data (Sense Key 01h, Code 0Bh, Qual
01h).
The drive temperature is reported in “Log Sense Page 2F”.