Technical information

HGST Ultrastar C15K600 Hard Disk Drive Specification
90
- All commands except REQUEST SENSE and INQUIRY return Check Condition status, while the format
operation is an active I/O process.
- When tagged queuing is enabled (DQue = 0), all commands except REQUEST SENSE and INQUIRY return
Queue Full status, while the FORMAT UNIT command is a queued I/O process.
- When tagged queuing is disabled (DQue = 1), all commands except REQUEST SENSE and INQUIRY return
Busy status, while the FORMAT UNIT command is a queued I/O process
- If a REQUEST SENSE command is received while a format operation is an active I/O process, the Target
returns Good status. The sense key is set to Not ready and the additional sense code and qualifier is set to
Format In Progress.
- If an INQUIRY command is received while a format operation is an active I/O process, the Target returns Good
status and Inquiry data as requested.
The format operation must complete successfully for the Drive to be usable. If the command is interrupted by a reset,
power down, or an unrecoverable error, the Drive enters a degraded mode of operation in which reading and writing
are prohibited. To exit the degraded mode, another FORMAT UNIT command must be sent by the Initiator and
completed successfully by the Target.
The FORMAT UNIT command sets the Unit Attention Condition for all Initiators except the one that issued the
FORMAT UNIT command.