Datasheet

TS-x51 Series. Powered by QNAP's Exclusive QvPC Technology

How to map the destination folder into a Windows VM?

Please follow these steps:

(Using Windows

as an example) Please go to "Computer" and click [Map network drive]

Please insert the IP address of your Turbo NAS and click [Browser]. Select the folder you want to use and click [Finish].

This folder you want to use will appear as a network drive on your "Computer

＂

You can carry out the aforementioned scenario using the below steps.

Download the Virtualization Station from the App Center and create a Windows-based VM (you will need at least two

Ethernet cables connected to the Turbo NAS)*

Install the printer drivers in the VM

Download the QNAP mobile app "Qﬁle" from the App Store (iOS) or Play Store (Android) and set a destination folder on the

Turbo NAS for uploading photos

Map the destination folder into the VM

Access the VM remotely via web browser to select a photo and then print it instantly

*The network usage of Virtualization Station is separated from the Turbo NAS. One Ethernet cable is reserved for the Turbo NAS to

use, so you will need at least another one for the Virtualization Station to use.

Select a file

to print !!