User manual
Table Of Contents
- Safety Warnings
- CPU and Memory Specifications
- Power Button and Reset Button Behavior
- USB One Touch Copy
- LED and Alarm Buzzer Specifications
- Upgrade Memory on QNAP Turbo NAS (RAM Module Installation)
- Network Expansion Card Installation
- Install an mSATA Flash module to the NAS.
- Hot-swap Hard Drives
- RAID Recovery
- Use the LCD Panel
- Install Power Supply Unit
- Technical Support
- Product Compliance Class
- GNU GENERAL PUBLIC LICENSE
31
4. Carefully grasp the edge of the mSATA Flash Module. Align the notch on the gold
edge of the mSATA module with the notch in the mSATA slot. Insert the mSATA Flash
Module to the mSATA slot until it cannot go any further.
5. Insert the module fixing
6. Return the Motherboard Drawer to its normal position.
7. Connect the power adaptor and cables to the NAS.