User manual
Table Of Contents
- Table of Contents
- Safety Warnings
- CPU and Memory Specifications
- Power Button and Reset Button Behavior
- USB One Touch Copy
- LED and Alarm Buzzer Specifications
- Upgrade Memory on QNAP Turbo NAS (RAM Module Installation)
- Network Expansion Card Installation
- Install an mSATA Flash module to the NAS.
- Hot-swap Hard Drives
- RAID Recovery
- Use the LCD Panel
- Install Power Supply Unit
- Technical Support
- Appendix A. Product Compliance Class
- GNU GENERAL PUBLIC LICENSE
Chapter 11. Install Power Supply Unit
Note: The following instructions should only be performed by an authorized and trained
technician.
To replace a failed power supply unit on the TS-EC2480U-RP, TS-EC1680U-RP,
TS-EC1280U-RP, TS-EC880U-RP Turbo NAS Turbo NAS, follow the steps below.
1. Turn off the NAS. Disconnect the power adaptor, network cable(s), and any other
connectors or cables from the NAS.
2. Hold the black handler and press and hold the green button firmly.
46