User Manual

ManualsBrandsHH Electronics Manualsactive speakerHH Electronics HPT-112 Active 12 PA Speaker

ACTIVE LOUDSPEAKERS

Designed and Engineered in the UK by HH Electronics LTD.

USER MANUAL

Summary of content (20 pages)

PAGE 1
ACTIVE LOUDSPEAKERS USER MANUAL Designed and Engineered in the UK by HH Electronics LTD.
PAGE 2
ACTIVE LOUDSPEAKER PORTABLE SOUND CONTENTS 1. _____________________________ COVER PAGE 2. _____________________________ CONTENTS 3. _____________________________ SAFETY WARNINGS 4. _____________________________ GENERAL INSTRUCTIONS 5. _____________________________ FR DE SAFETY 6. _____________________________ ES PT SAFETY 7. _____________________________ IT CN SAFETY 8. _____________________________ KR SAFETY 9. _____________________________ INTRODUCTION, QUICK START 10.
PAGE 3
ACTIVE LOUDSPEAKER PORTABLE SOUND Intended to alert the user to the presence of uninsulated ‘Dangerous Voltage’ within the products enclosure that may be sufficient to constitute a risk of electrical shock to persons. Ce symbole est utililise pur indiquer a l’utilisateur de ce produit de tension non-isolee dangereuse pouvant etre d’intensite suffisante pour constituer un risque de choc electrique.
PAGE 4
ACTIVE LOUDSPEAKER PORTABLE SOUND GENERAL INSTRUCTIONS In order to take full advantage of your new product and enjoy long and trouble-free performance, please read this owner's manual carefully, and keep it in a safe place for future reference. 1) Unpacking: On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit from the HH factory to your dealer.
PAGE 5
ACTIVE LOUDSPEAKER PORTABLE SOUND FR CONSIGNES DE SÉCURITÉ IMPORTANTES ATTENTION: L'utilisation de tout appareil électrique doit être soumise aux précautions d'usage incluant: 1. Lisez ces instructions 2. Gardez ce manuel pour de futures références. 3. Prêtez attention aux messages de précautions de ce manuel. 4. Suivez ces instructions. 5. N'utilisez pas cet appareil à proximité de plans d'eau. 6. N'utilisez qu'un tissu sec pour le nettoyage de votre appareil. 7.
PAGE 6
ACTIVE LOUDSPEAKER PORTABLE SOUND INSTRUCCIONES IMPORTANTES DE SEGURIDAD ES INSTRUÇÕES DE SEGURANÇA PT CUIDADO: Cuando use productos electrónicos, debe tomar precauciones básicas, incluyendo las siguientes: 1. Lea estas instrucciones. 2. Guarde estas instrucciones. 3. Haga caso de todos los consejos. 4. Siga todas las instrucciones. 5. No usar este aparato cerca del agua. 6. Limpiar solamente con un trapo seco. 7. No bloquear ninguna de las salidas de ventilación.
PAGE 7
ACTIVE LOUDSPEAKER PORTABLE SOUND IMPORTANTI ISTRUZIONI DI SICUREZZA IT AVVERTENZA: Quando si usano prodotti elettrici, alcune precauzioni dovrebbero essere sempre seguite, tra cui le seguenti: 1. Leggere queste istruzioni. 2. Conservare queste istruzioni di sicurezza. 3. Osservare tutte le avvertenze. 4. Seguire tutte le istruzioni. 5. Non utilizzare questo apparecchio vicino all'acqua. 6. Pulire solo con un panno asciutto. 7. Non ostruire le aperture di ventilazione.
PAGE 8
ACTIVE LOUDSPEAKER PORTABLE SOUND KR © 2021 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
PAGE 9
ACTIVE LOUDSPEAKER PORTABLE SOUND INTRODUCTION The HH HPT range of active cabinets, engineered in the UK to deliver power, performance and reliability. The HPT-112 12-inch active loudspeaker enclosure offers 1400W of Class D power output and an impressive SPL of 130dB with the larger HPT-115 15-inch system providing 1400W of Class D power output and an SPL of 131dB.
PAGE 10
ACTIVE LOUDSPEAKER PORTABLE SOUND REAR CONTROL PANEL - THIS IS THE SAME FOR BOTH MODELS. 1 & 2. INPUTS: A Combi Input allows for the use of both XLR and 1/4" Jacks and accepts balanced and unbalanced signals. Note: a stereo signal on a TRS lead cannot be connected directly, and must be split to two mono connectors. GAIN: Use to set the channel level. Note: Set the Gain control to minimum before connecting an audio signal.
PAGE 11
ACTIVE LOUDSPEAKER PORTABLE SOUND REAR PANEL CONTINUED 7. MAINS INLET SOCKET AND FUSE: IEC input for connection of an appropriate mains lead. Only replace the fuse with the type indicated on the rear panel. 8. MAINS SWITCH: Turns the system on and off. Ensure the Volume controls is set to minimum when switching on and off. 9. VOLTAGE SELECT SWITCH: As previously mentioned, please enure the setting is correct before powering up to prevent damage to the amplifier. 8 7 10.
PAGE 12
ACTIVE LOUDSPEAKER PORTABLE SOUND EXAMPLE 1 - Daisy chained If additional cabinets are required in the signal chain, simply connect the Mix Out of the primary cabinet to the Input of the Secondary cabinet.
PAGE 13
ACTIVE LOUDSPEAKER PORTABLE SOUND EXAMPLE 2 - A DJ setup HPT-112 / HPT-115 CABINET HPT-112 / HPT-115 CABINET MODE INPUT 1 INPUT 1 0 0 MUSIC MODE LIVE MONITOR MIC LINE MIC LINE VOCAL GAIN GAIN MUSIC INPUT 1 INPUT 1 LEFT RIGHT EXAMPLE 3 - A mono PA setup HPT CABINET INPUT 1 MODE 0 MUSIC MODE MIC LINE GAIN LIVE MONITOR VOCAL VOCAL INPUT 1 © 2021 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
PAGE 14
ACTIVE LOUDSPEAKER PORTABLE SOUND EXAMPLE 4 - Stereo setup with mono bass HPS-115 HPT CABINET HPT CABINET INPUT 1 INPUT 1 0 0 MIC LINE MIC LINE GAIN GAIN INPUT 1 INPUT 1 MASTER L CLIP MASTER R POWER 5 (Rear panel of HPS-115) EXAMPLE 5 - Full stereo setup HPT CABINET HPT CABINET INPUT 1 INPUT 1 0 0 MIC LINE MIC LINE GAIN GAIN INPUT 1 INPUT 1 HPS-115 HPS-115 (Rear panel of HPS-115) CLIP CLIP POWER POWER MASTER L MASTER R © 2021 HH Electronics Ltd Designed and Engin
PAGE 15
ACTIVE LOUDSPEAKER PORTABLE SOUND CONFIGURATIONS The intuitive design of the HPT cabinets provide user flexibility and a product that will serve in many situations: A: B: C: D: E: F: Tripod/pole mounting - via the 35mm pole socket. Pole on sub. Flown vertically. Flown horizontally. Freestanding - on the ground. Monitor mode - the cabinets shape allows for horizontal/angled position on stage.
PAGE 16
ACTIVE LOUDSPEAKER PORTABLE SOUND FITTING EYE BOLT A: To fit the eye bolts, first locate and remove the four rubber protection caps (positions shown below). 1 B: Replace with a suitable eye bolt. Ensure thread is fully engaged into the insert. Note that eye bolts for flying systems must be cast, shouldered fittings rated for the purpose. Forged steel eye bolts of the type typically available from DIY suppliers are NOT suitable and should not be used under any circumstances.
PAGE 17
ACTIVE LOUDSPEAKER PORTABLE SOUND BLOCK DIAGRAM GAIN CH1 1/O CONNECTOR WIRING MIC/LINE INPUT 6.35MM (1/4") BALANCED JACK GND -(COLD) +(HOT) GAIN CH2 6.35MM (1/4") UNBALANCED JACK MIC/LINE INPUT GND +(HOT) TWEETER MASTER VOLUME HF AMP MALE MALE GAIN DSP WOOFER 1 3 3 MODE MUSIC LIVE LF AMP 1 2 2 (FRONT VIEW) (REAR VIEW) 1: GROUND 2: HOT 3: COLD MONITOR FEMALE FEMALE VOCAL 1 1 2 MIX OUT 2 3 3 (FRONT VIEW) (REAR VIEW) GND LINK FREQUENCY RESPONSE HPT-112 0.
PAGE 18
ACTIVE LOUDSPEAKER PORTABLE SOUND SPECIFICATION: HPT-112 Model System type Power Rating Frequency response Max SPL (1M) (Peak) HPT-112 2 way active 12" loudspeaker, Bass reflex 1400W Peak, 700W Continuous 45Hz-20KHz 130 dB SPL Speaker LF Driver 12" HH designed professional low mid driver featuring imported glass reinforced cone HF Driver Coverage 1" Compression Driver 90°H X 90°V 2.
PAGE 19
ACTIVE LOUDSPEAKER PORTABLE SOUND SPECIFICATION: HPT-115 Model HPT-115 2 way active 15" loudspeaker, Bass reflex System type Power Rating Frequency response Max SPL (1M) (Peak) 1400W Peak, 700W Continuous 41Hz-20kHz 131 dB SPL Speaker LF Driver 15" HH designed professional low mid driver featuring imported glass reinforced cone HF Driver Coverage 1" Compression Driver 90°H X 90°V 2.
PAGE 20
hhelectronics hhelectronics hhelectronics www.hhelectronics.com Model number: Serial number: Place of purchase: Date of purchase: Version 1.