User Manual

5.1 Sliding chute adjustment
Adjustable bolts are installed on the front and side equipment for eliminating the space between the rack and sliding
chute. The bolts are loosened or tightened to adjust the sliding chute before using.
Figure 9 – sliding chute adjustment
6 Equipment use
It is very simple to use the equipment:
1. The part to be suppressed is put on the positioning plate or the base of the equipment, please make
sure the part is on the rack.
2. Rotate the handwheel to make the rack near the part to be suppressed.
3. Press the handle and the part needs to be suppressed again if it deviates from the original position.
14/16