Product Manual

5
2.2.2Battery Off
When the battery is on, briefly press the power button once, and then long
press the power button for more than 2 seconds to turn off the battery. After the
battery is turned off, the indicator lights are off.
2.3 Power cable & Data cable
HD TLS360 system is equipped with 1 power cable and 2 data cables, as
shown in the figure below.
Figure 2-3.1 Power cable
Figure 2-3.2 Network cable
Figure 2-3.2 Camera data cable
Power cable: used to connect the power port of HD TLS360 host to the
battery compartment.
Network cable: used to connect the LAN port of the HD TLS360 host
and the network port of the computer.
Camera data cable: used for the connection between camera USB3.0
interface and computer USB port.
Notice:
1. The above cables are directional connecting wires, and the
positioning pin (the position marked by the red dot of the
connector) faces upward during connection.