Installation Guide

1
Safety Notice
If this solid fuel room heater is not properly installed, a house fire may result. For your
safety and to reduce the risk of fire, follow the installation instructions. Contact local
building officials, fire officials or the authority having jurisdiction about restrictions and
installation inspection requirements in your area, including the need to obtain a permit.
Kindly save these instructions for future reference.
Tested to U.S. Standards: UL 1482-2011(R2015)
VERY IMPORTANT
PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE YOUR NEW
ROOM HEATER. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY
DAMAGE, BODILY INJURY, OR EVEN DEATH! FAILURE TO READ AND FOLLOW THESE
INSTRUCTIONS BEFORE YOU PROCEED MAY RESULT IN DAMAGE, VOIDING YOUR
WARRANTY.
DO NOT INSTALL IN A MOBILE HOME.
DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE.
DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS SUCH AS GASOLINE, NAPHTHA OR
ENGINE OIL.
HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
CONTACT MAY CAUSE SKIN BURNS.
DO NOT TAMPER WITH OR USE THE SPIN DRAFT AIR CONTROL IN THE FUEL LOADING
DOOR. USING THIS CONTROL WILL CAUSE AN OVERFIRING CONDITION.
Please contact the Hi Flame® dealer in your area if you have any questions about your stove
that are not covered in this manual.
Proposition 65 Warning: Fuels used in gas, wood-burning or oil fired appliances, and the
products of combustion of such fuels, contain chemicals known to the State of California to
cause cancer, birth defects and other reproductive harm. California Health & Safety Code Sec.
25249.6
Tested to CA Standards: ULC S627-00