User's Manual

Initial System Setup
Fleet Management SW
Tanker Truck Monitoring System- User’s Guide 31
2.8.1 Seal Configuration and Management
• Defining seal parameter thresholds
• Writing and reading seal’s electronic manifest such as cargo type, source, destination,
etc.
• Viewing seal status
• Viewing events stored on seals
• Sending commands to seals – Set, Read Events, etc.
2.8.2 Reader Configuration and Management
• Configuring Readers to forward interrogation (Verify) responses and seal initiated events
(Bursts) from specific seals in order to optimize operation
• Configuring Verify command (interrogation) parameters per Reader to optimize operation
in specific zones
2.8.3 Monitoring Events
• Burst and Verify events
• Real-time display of seal events such as opening of locks, tampering, motion, etc.
• Each event is displayed with detailed information fields such as event source, generation
time, Reader ID, etc.
• Filtering displayed information according to user defined criteria
2.8.4 Event Notification Options
Users can be notified of events through a variety of methods:
• SMS, E-mail and Voice messages to defined destinations
• Sound or visual on-screen alarms
2.8.5 Report Generation Options
Users can generate reports based on received events by filtering the received events according
to various user defined criteria such as date, event type, source, Reader ID, etc.
The selected events can then be saved as a *.TXT file.